BETAFPV Lite Radio 3 Pro Radio Transmitter CC2500/ELRS [DG]

Are you in Australia and eager to buy a top - notch radio transmitter? Look no further than the BETAFPV Lite Radio 3 Pro! It's an open - source radio remote control with the EdgeTX system. The hall gimbals are a game - changer, featuring four precision bearings, adjustable spring tension, and ergonomic stick ends for an amazing feel. The 1.3 - inch OLED display on top gives you instant data and an easy - to - use controlling interface. It has two internal RF systems and supports an external nano TX module, making it a multi - protocol wonder. The internal ELRS module can reach an output power of 500mW, adapting well to different controlling ranges. It also reserves a nano bay for external TX modules, supporting popular market modules and multiple protocols like MULTI, CRSF, PPM, XJT, DSM2, R9M, etc. Compared with other models in the LiteRadio series, the Lite Radio 3 Pro has significant upgrades in power, display, and protocol support.

Using the BETAFPV Lite Radio 3 Pro is a breeze. First, when it comes to switching protocols and binding, for the ELRS 2.4G version, turn on both internal and external RF protocols. Set the external RF mode to OFF, turn on the internal RF and select CRSF mode. Then enter the ExpressLRS.lua interface and select Bind to complete the linking. For the CC2500 version, turn off the external RF, turn on the internal RF and choose the corresponding protocol under MULTI mode, then select Bind. When using an external TX module, turn off the internal RF, turn on the external RF, select the correct protocol according to the module, and refer to its manual for binding. Gimbal calibration is important. Enter the calibration mode and follow the prompts. Move the joysticks gently during calibration to ensure accuracy. For firmware upgrade, you can use WiFi upgrading for ELRS. Enter the ELRSV2.lua interface, select WiFi Connectivity, connect to the WiFi named ExpressLRS TX with the password expresslrs, and then upgrade the firmware on the official site. Or you can use EdgeTX Passthrough flashing. Note that BETAFPV is working on getting the latest configurator to support this for the Lite Radio 3 Pro. As for maintenance, keep the transmitter clean and store it in a dry place. Avoid dropping it or exposing it to extreme temperatures.