CADDX Walksnail Avatar GT Kit WN12-2W14B

The Walksnail Avatar GT KIT is a dream come true for FPV enthusiasts. It offers unparalleled performance and extended range. With a powerful VTX that can reach up to 2 - watt transmission power, you'll enjoy ultra - long FPV flights with clear 1080p HD visuals. Key features include long - range capability, 1080P 100fps video, dual antennas for stable signals, and high - frame starlight performance. It has a top - mounted heatsink to keep it cool during long - term use. The Micro SD card slot supports up to 256GB, allowing you to record HD flight videos in 1080p or 720p. The internal ceramic antenna optimizes low - power performance, reducing power consumption and heat. It also has improved GPS interference resistance for reliable flights. The Pro camera with a 1/1.8 - inch Sony Starvis II sensor provides excellent night vision, comparable to daytime clarity. It supports Gyroflow for smooth video and offers both high and standard frame rates with an average delay of 22ms in high - frame mode. Specifications: The camera has multiple resolution options, a 160° FOV, and weighs only 9.5g. The VTX operates at 5.725 - 5.850 GHz, has wide power input (11.1V - 25.2V), and supports various FC systems. The kit includes the Walksnail Avatar GT KIT, a quick guide, screws, spacers, SD card stickers, and a 4 - pin power cord.

Using the Walksnail Avatar GT Kit is straightforward. First, connect the camera to the VTX using the coaxial cable. Then, power up the VTX with a power source within the 11.1V - 25.2V range. You can insert a Micro SD card (up to 256GB) into the slot for recording. When flying, the dual antennas provide stable signals, but make sure to position the antennas properly for the best performance. For night flights, the Pro camera's Sony Starvis II sensor will give you clear visuals. You can adjust the resolution and frame rate according to your needs. During use, keep an eye on the operating temperature (it should be between - 10 - 40℃). To maintain the kit, clean the camera lens regularly with a soft cloth. If the heatsink gets dirty, gently blow the dust off. When not in use, store the kit in a dry and cool place to prevent damage. And always follow local regulations regarding FPV flying and power limits.