D25 Soldering Tip Replacement (Compatible with TS80/TS80P/TS1C)

Are you searching for a top - notch D25 soldering tip replacement in Australia that's compatible with TS80, TS80P, and TS1C? The D25 tip is a great choice! It has a blunter and rounder shape, and it works extremely well with the TS80. If you do a lot of soldering, this tip is perfect. Its larger surface area transfers more heat, letting you melt more solder quickly. But if you need a blade - shaped tip for more surface area or better accuracy, check out the K4 tip. And for a narrow standard cone shape, the B02 tip is what you want. Features of the D25 tip include a tip type of D25, a length of about 100mm (60 + 40mm), and a weight of 14g. It has an internal - heated heating core designed specifically for the TS80, with the tip and heater as one unit. We also offer a full range of other tips like B02, BC02, K4, and J02. Browse more related products such as all TS80 & TS80P items, TS1C products, TS100/TS101, Pinecil V2, soldering irons, Miniware products, and soldering tips & consumables.

Using the D25 soldering tip is easy. First, make sure your soldering iron (TS80, TS80P, or TS1C) is turned off and cooled down. Then, replace the old tip with the D25 tip. Once it's installed, turn on the soldering iron and wait for it to heat up. When soldering, place the tip on the area you want to solder. Because of its large surface area, it can transfer heat quickly, but don't apply too much pressure. As for maintenance, after each use, turn off the soldering iron and let it cool. Clean the tip with a damp sponge to remove any solder residue. Store the tip in a dry place to prevent rust. Also, be careful not to drop the tip, as it can damage the internal - heated core.