Emax BabyHawk II Analog 3.5 Freestyle BNF w/ RunCam Racer 5

Are you in Australia and looking for a high - performance micro - quad? The EMAX BabyHawk 2 is your ideal pick. It's a unibody quad with a unique 3.5' prop, offering great power and responsiveness. Here are its key features: ### Specifications - Propellor Size: 3.5' - Antenna: Linear Dipole - Camera: Runcam Racer 5 ### Emax Babyhawk II AIO Flight Controller - Input Voltage: 2 - 4S LiPo - OSD: Yes - UARTs: 2 Sets - BEC: 3.3V, 5V - Current Sensor: Yes - Buzzer: Yes - Barometer: No - Black Box: No - Max. Continuous Current: 25A - ESC Firmware: BLHeli_S - Stack Size: 25x25mm - Dimensions: 39x37x15mm - Weight: 12.4g ### EMAX ECO 1404 3700KV MICRO MOTOR - Kv: 3700Kv - Input Voltage: 4S LiPo - Stator Dimensions: Φ14x4mm - Shaft Diameter: 1.5mm - Mounting Pattern: Φ9mm - Weight (w/ wires): 8.6g ### TBS Unify Pro32 Nano VTX - Input Voltage: 3 - 13V - RF Output Power: 25 - 500mW - Antenna Connector: U.FL - Power/Video Connection: Solder Pads - Stack Size: Not Stack Mounted - Dimensions: 15x13x2mm - Weight: 131g ### INCLUDES - 1x EMAX BNF Baby hawk II Analog 3.5' Quad ### Browse more - Browse all BNF Quads - Browse all Emax Quads - Browse all EMAX

Using your Emax BabyHawk II is easy. First, make sure your battery is properly connected. The input voltage for the flight controller is 2 - 4S LiPo, and for the motor, it's 4S LiPo. Check that all the parts are securely in place before you take off. When flying, start in an open area to get used to the quad's responsiveness. Here are some important notes. Don't exceed the maximum continuous current of 25A to avoid damaging the flight controller. Be careful when handling the motor's shaft as it's only 1.5mm in diameter. For maintenance, regularly check the propellers for any signs of wear or damage. Clean the camera lens to ensure clear video. If you're not using the quad for a long time, store it in a dry place. Also, keep the battery charged at an appropriate level when not in use to prolong its life.