EMAX TinyHawk II Freestyle FPV Drone RTF Kit [DG]

Are you looking to buy the EMAX TinyHawk II Freestyle FPV RTF Kit in Australia? The newly redesigned Tinyhawk II Freestyle is an ideal beginner outdoor FPV quad. It features a high - quality camera for easy navigation. The RTF bundle provides everything you need to start flying in minutes, including goggles, a radio, and the TinyHawk II Freestyle quadcopter. ### TinyHawk II Freestyle Specifications #### Frame - Wheelbase: 115mm - Dry Weight: 49g - All Up Weight: 79g with 2x 450mAh 1S battery - Frame Material: Carbon Fiber #### Motors - Stator Size: 1103 - Kv: 7000kv - Propeller Mount: T - mount, 1.5mm shaft - Propeller: Avan Rush 2.5' #### All - In - One (AIO) Flight Controller - Flight Controller: F4 (MATEKF411RX Firmware) - ESC: 4 - in - 1 5A BlHeli_S - Receiver: EMAX SPI Receiver (Compatible with FrSky D8 mode) - Battery Connector: JST - PH2.0 Duo #### FPV System - Ham radio license required for use in North America. - VTX Power: 25/100/200mw Switchable (set to stay at 25mW until armed) - Channels: 37CH incl. Raceband - Camera: RunCam Nano 2 1/3' 700TVL CMOS - Smart Audio Connected #### EMAX Transporter Goggles Specifications - Maximum appearance size 140×153×90(mm) - Weight (without battery) 398g - Resolution 480×272 - Battery 1 cell 18650 lipo battery #### EMAX E6 Transmitter Specifications - Maximum appearance size 181×213×80(mm) - Weight (without battery) 211g - Number of channels 6 Channels - Transmission frequency 2.4GHz ISM Band（2400MHz~2483.5MHz） - Output Power 22dbm - Modulation GFSK - Battery 1 cell 18650 lipo battery #### Features - Durable aerospace - grade 3k woven carbon fiber - BlHeli_S ESC - F4 (MATEKF411RX Firmware) Flight Controller - RunCam Nano 2 FPV camera - More powerful VTX with 25/100/200mw power levels - Smart Audio connected - FRSKY D8 compatible - Efficient Emax 1103 7000Kv brushless motors - Avan Rush 2.5' props - Pre - tuned for both expert and new pilots with 3 rate profile settings - Plug - in type motors for easy maintenance - FrSky compatible D8 receiver built into FC - Custom carbon fiber themed carrying case #### Package Includes - 1x Tinyhawk II Freestyle Drone - 1x E6 Transmitter - 1x Transporter Goggles w/ Battery + Antennas - 2x EMAX 450mAh 1S HV Battery - 1x 1S USB LiPo Charger - 1x spare set of propellers - 1x Carbon Fiber Carrying Case Note: The Tinyhawk II Freestyle is set to stay at 25mW until you arm the motors, even if you unlock the VTX and change power levels via OSD/Smart Audio.

Using the EMAX TinyHawk II Freestyle FPV Drone is easy. First, charge the batteries included in the package using the 1S USB LiPo Charger. After charging, insert the batteries into the drone and the transmitter. Connect the transmitter to the drone, and turn on both. Put on the EMAX Transporter Goggles, and you're ready to fly. There are 3 rate profile settings on the drone, so you can choose the flying feel that suits you best. When flying, keep in mind that a ham radio license is required for use in North America. Also, the VTX power of the drone is set to 25mW until you arm the motors, even if you've unlocked the VTX and changed power levels. For maintenance, the plug - in type motors make it easy to replace if needed. Check the propellers regularly for any signs of damage, and use the spare set when necessary. Store the drone in the custom carbon fiber carrying case to protect it from damage. Make sure to keep the batteries in a safe place and follow proper battery storage guidelines.