EMAX Tinyhawk II Micro Indoor FPV Racing Drone RTF [DG]

Are you in Australia and eager to buy the Emax Tinyhawk II RTF? This amazing drone offers a host of top - notch features. First, with new motors, it has 7% more power. The video transmission is greatly improved, boasting 200mW power and better filtration. The new Runcam Nano2 camera provides vivid colors, wide dynamic range, and sharp optics at an extremely low weight. The adjustable camera angle allows it to adapt to different flight styles. There's also a throttle response LED system. The frame is redesigned for greater durability. **Frame Details**: It has a 75mm wheelbase, a dry weight of 31.2g, and an all - up weight of 43.5g with a 1x 450mAh 1S battery. The frame is made of polypropylene. **Motors**: The stator size is 0802 with a Kv of 16000kv. It uses a Push - On Avan TH - style propeller mount and Avan Turtlemode 4 - Blade propellers. **All - In - One (AIO) Flight Controller**: It comes with an F4 flight controller (MATEKF411RX Firmware), a 4 - in - 1 5A BlHeli_S ESC, an EMAX SPI Receiver (compatible with FrSky D8 mode), and a JST - PH2.0 battery connector. **FPV System**: The VTX power is switchable between 25/100/200mw, has 37 channels including Raceband, a RunCam Nano 2 1/3' 700TVL CMOS camera, and is Smart Audio Connected. **What's Included**: You'll get 1x Tinyhawk II FPV Racing Drone, 1x EMAX Transporter 5.8G FPV Goggles, 1x EMAX Transporter 18650 Goggle Battery Pack with USB Charging, 1x EMAX E6 Transmitter, 1x EMAX 450mAh 1S HV Battery, 1x EMAX 300mAh 2S HV Battery, 2x CCW + 2x CW Spare Props, 1x 1S - 2S USB LiPo Charger, 1x Screwdriver + Hardware Kit, 1x Micro USB Charging Cable, and 1x Faux Carbon Fiber Carrying Case. Note that although the Tinyhawk is specified as 1s - 2s, we only recommend 1s input from our experience. Browse other EMAX and Tinyhawk products too!

Using the EMAX Tinyhawk II is a breeze. First, charge the batteries using the provided USB LiPo charger. Once charged, insert the battery into the drone. Turn on the EMAX E6 transmitter and the drone, and pair them according to the instructions. Adjust the camera angle to suit your flight style before taking off. When flying, the throttle response LED system will give you a good sense of how the drone is performing. Some important notes: Only use a 1S battery as recommended, even though the drone is specified for 1S - 2S. Avoid flying in areas with strong interference to ensure a stable video transmission. For maintenance, after each flight, check the propellers for any damage. If they are worn out, replace them with the spare props. Keep the drone clean and store it in the provided faux carbon fiber carrying case to protect it from dust and scratches. Regularly update the flight controller firmware to keep the drone in top condition.