FETtec FC G4 v1.7 IIM-42652 Flight Controller

Looking to buy a FETtec FC G4 v1.7 Flight Controller in Australia? You're in the right place!

Using the FETtec FC G4 v1.7 Flight Controller is easy. First, connect it to your power source, making sure to use a 2S - 6S Lipo battery as it's designed for 6 - 27V. Connect your ESCs to the 8 - pin connectors, the receiver to the 4 - pin connector, and other devices like the VTX and camera to the appropriate connectors. Then, flash the firmware. You can use the FETtec Alpha FC firmware, and if you want, you can also flash the KISS FC firmware. When using it, be careful not to expose it to excessive voltage or current peaks, as the IO protection can only handle so much. Also, make sure all connections are secure to avoid any signal loss. For maintenance, keep it clean and dry. If you're not using it for a long time, store it in a cool, dry place. Check the connectors regularly for any signs of wear and tear, and replace them if necessary. And don't forget to update the firmware periodically to get the best performance.