HDZero Race V3 Digital HD Video Transmitter

Are you in Australia and seeking to buy a top - notch digital video transmitter for FPV racing? Look no further than the HDZero Race V3 VTX. This 3rd generation transmitter offers high - quality video in 540p90, 720p60, and 1080p30 resolutions, with switchable 25/200mW power on the 5.8GHz frequency band. It has a wide voltage range from 4V to 12V, so it can be powered by most FCs' 5V 1.5A regulator or up to 12V for those with an HD VTX plug. Measuring just 28x32x5mm and weighing only 5.5 grams, it's small, light, and its width similar to many FCs improves durability and cuts down weight. The antenna is securely attached with a metal bar and screws, and installation is a breeze - no soldering needed, just plug the wire harness into a compatible HD - ready FC. Its 1.6mm thick PCB and large - sized components ensure stability, and an extra glue coating on smaller parts offers crash protection.

Using the HDZero Race V3 Digital HD Video Transmitter is easy. First, make sure your FC is HD - ready. Then, without any soldering, simply plug the wire harness into the compatible FC. You can choose between 25mW and 200mW power depending on your needs. When it comes to power input, it can work with a voltage between 4V and 12V. As for installation, use the provided M4 to M3 gummies and screws to mount it following the 20x20mm pattern. For maintenance, keep it clean and dry. Avoid exposing it to extreme temperatures or rough impacts. If you notice any loose parts, especially the antenna attached by the metal bar and screws, check and tighten them. This will help keep your transmitter in good condition and ensure high - quality video transmission for your FPV racing adventures.