iFlight BLITZ Practice Soldering Board

Are you in Australia and searching for an iFlight BLITZ Practice Soldering Board? Tired of bad soldering and wasting costly electronics? The Blitz Practice Soldering Board is here to save the day! It mimics almost every common solder joint in the FPV world. You can practice soldering tiny pins and pads or larger gauge wires. With this board, you can achieve perfect solder jobs quickly without harming real electronics. Check out the soldering tutorial video that most FPV pilots should watch. Features include practicing soldering without affecting real electronics and the ability to handle both tiny pin and large gauge wire soldering. Specifications: minimum line distance is 0.245mm, immersion gold thickness is 1u, minimum aperture is 0.250mm, solder mask color is ink green, total number of holes is 926, dimensions are 40*100mm (X - direction size 100mm, Y - direction size 40mm), character color is white, thickness is 1.6mm, weight is 13.8g/pc, and it has 2 layers. It includes 1x iFlight BLITZ Practice Soldering Board. You can also browse all iflight, soldering accessories, and FPV products.

Using this iFlight BLITZ Practice Soldering Board is easy. First, gather your soldering tools like a soldering iron and solder. You can start by practicing on the tiny pins or large gauge wire areas as you like. When soldering, make sure your soldering iron is at the right temperature. Keep it steady and apply the solder smoothly. Remember to work in a well - ventilated area to avoid inhaling fumes. After use, clean the soldering iron tip properly and store the board in a dry place. Don't expose it to extreme temperatures or moisture. If there's any debris on the board, you can gently clean it with a soft brush. This way, your practice soldering board will last a long time and keep helping you improve your soldering skills.