ISDT AIR8 500W 20A 1-8S DC Smart Charger (DC INPUT)

Are you in Australia looking to buy a smart charger? The ISDT Air8, successor to the popular Q8 charger, is here! It has all the features you loved about the Q8 plus wireless connectivity. Note, this is a DC charger only. You'll need an AC to DC power supply or a compatible USB wall charger to plug into a 240v AC wall socket. Key features include APP remote control via the ISDLink APP for OTA upgrades, preset charging tasks, and real - time charging process monitoring. It supports BattAir smart batteries, automatically identifying battery types and matching optimal charging parameters. It can handle 8S ULiHv batteries and various other battery types like 1 - 12S Pb and 1 - 16S NiMH/Cd. Firmware can be upgraded in two ways: OTA in the ISDLink APP or on a PC via USB port. Specifications: Max Charge Capacity is DC 500W, Charge Current ranges from 0.1A - 20.0A, Max Discharge Capacity is 15W, Discharge Current is 0.1A - 1.5A, Input Voltage is DC 10 - 34V, Output Voltage is DC 1 - 35V. It comes with 1x ISDT Air8 500W 20A 1 - 8S DC Smart Charger.

Using the ISDT Air8 charger is easy. First, make sure you have the right power supply. If you're using a 240v AC wall socket, you'll need an AC to DC power supply or a compatible USB wall charger. Connect the charger to the power source and then to your battery. Open the ISDLink APP on your device. You can preset charging tasks, and monitor the charging process at any time. The charger will automatically identify the battery type and set the optimal charging parameters. When charging is done, disconnect the charger from the battery first and then from the power source. As for maintenance, keep the charger in a dry and cool place. Avoid exposing it to water or extreme temperatures. If you need to upgrade the firmware, you can do it either through the ISDLink APP or by connecting it to a PC via USB port.