iSDT P10 Dual Channel 250W x2 1-6S Lipo Charger (DC INPUT)

Are you in Australia and looking to buy a top - notch lipo charger? The iSDT P10 is here to meet your needs. It features a high - power synchronous dual channel with smart charging, which is a big leap in lipo charger design. A smart high - speed processor sends parameters individually to each charger port. If you need chargers with more wattage and the ability to charge 7 & 8S batteries, check out the P20 or P30! Note that this is a DC charger only. To plug it into your AC 240v wall socket, you'll need an AC to DC Power Supply or a compatible USB Wall Charger. **Features**: - Enjoy hassle - free charging with a single - port max power of 250W. - Benefit from synchronous parallel charging. - The built - in high - speed processor enables synchronous balance two - channel charging. - Reach a max parallel charging power of 400W. - The P10 provides a charging current range from 10A to 16A. - Support USB interface for firmware upgrades. Connect to your computer via the USB - C interface and always keep it up - to - date. - The charger's CH1 can be a DC power supply with adjustable digital power. In this mode, the max power is 120W, with CC: 0.2 - 5A and CV: 5 - 24V. - Thanks to the scOS 2.0 new dark mode, the charger turns off lights in the dark. It's suitable for low - light scenarios, adjusting the interface to a dark tone to reduce eye damage while keeping the iconic and comfortable charging display style. **Specifications**: - Model No: P10 - Input voltage: DC 10 - 30V - Output voltage: DC 1 - 26.4V - Max. input current: 20A - Charging current: 0.2 - 10.0A*2 - Balance current: 0.5A/Cell Max - Max. charging power: 250W*2 - Supports abnormal voltage and incorrect cell count setting alarms. - Supports quick - charge for LiFe, LiIon, LiPo, LiHv 1 - 6S, Pb 1 - 10S; NiMH, Cd 1 - 16S. - Working temperature: 0 - 40℃ - Storage temperature: - 20℃ - 60℃ - Dimension: 90.5×90.5x47mm - Weight: About 250g - Packaging includes: 1X ISDT P10 Charger **Browse more**: LiPo Chargers, LiPo Batteries, cables and connectors, iSDT products.

Using the iSDT P10 charger is quite simple. First, make sure you have the right power source. Since it's a DC charger, you'll need a DC power supply or convert AC to DC if you want to use a wall socket. Connect your battery to the appropriate ports of the charger. You can charge one battery per port or use the parallel charging feature for multiple batteries. When charging, the smart high - speed processor will handle the charging parameters for each port. When it comes to upgrading the firmware, just connect the charger to your computer through the USB - C interface. This will keep your charger up - to - date with the latest features. Here are some important notes. Always use the charger within the specified temperature range (0 - 40℃ for working and - 20℃ - 60℃ for storage). Make sure to set the correct battery type and cell count to avoid alarms. Also, when using the adjustable digital power supply mode on CH1, be aware of the max power limit of 120W. For maintenance, keep the charger clean and dry. Avoid exposing it to water or other liquids. If there are any issues or you notice abnormal behavior, stop using it immediately and check for possible problems.