iSDT Q8 500W 20A 1-8S Lipo Smart Charger (DC INPUT)

Are you looking to add a top - notch charger to your FPV kit? The iSDT Q8 500W 20A 1 - 8S Lipo Smart Charger is a gem in the FPV market. It's compact and lightweight, and won't heat up when discharging batteries. The charger features a modern, clean - looking touch - screen interface for easy operation. If you prefer a scroll wheel, check out the Q6 pro. Note that this is a DC charger only. To use it with a 240v AC wall socket, you'll need an AC to DC power supply or a compatible USB wall charger. Here are its specs: charging power is DC 500W, charging current ranges from 0.1A - 20.0A, discharging power is 15W, discharging current is 0.1A - 1.5A, input voltage is DC 10 - 34V, output voltage is DC 1 - 34V. It supports LiFe, Lion, LiPo 1 - 8S, LiHV 1 - 7S, Pb 1 - 12S, and NiMH 1 - 16S. The balance current is 1.5A/Cell Max, and its size is 80X80X34mm. The package includes 1X ISDT Q8 Charger. Browse all LiPo Chargers, LiION Chargers, LiPo Batteries, cables and connectors, and iSDT products.

Using the iSDT Q8 charger is easy. First, make sure you've selected the right battery type from the touch - screen interface. Connect your battery to the charger according to the correct polarity. For DC input, use a suitable power source within the 10 - 34V range. If you want to use it with an AC wall socket, remember to connect an AC to DC power supply or a compatible USB wall charger. When charging, keep an eye on the charger to ensure it doesn't overheat. Although it's designed not to heat up during normal operation, it's still a good practice. After charging, disconnect the battery and power source in the correct order. To maintain your charger, keep it clean and dry. Avoid exposing it to extreme temperatures or moisture. If you have any issues, refer to the user manual or contact customer support.