NewBeeDrone Infinity200 45A 3-6S BLHeli_32 4-in-1 20x20 ESC

Are you in Australia and seeking to purchase a high - quality ESC? Look no further than the NewBeeDrone Infinity200 45A 3 - 6S ESC! This 20x20 ESC is not only of top - notch quality but also plug - and - play with the DJI Digital FPV System. Check out the 'Infinity Stack Quick Look' video. Note that only the ESC is included, the stack is not. It features a heatsink, solder pads ready for signal and power, and the Smoov Performance Design by TeamNBD. The specifications are impressive, with a LiPo power input of 3S - 6S, BLHeli32 ESC programming, a continuous current of 45Ax4, and a burst current of 55Ax4. It weighs 13.0g and has dimensions of 39x29.5x8mm, with 20x20mm mounting holes. The signal plug is a JST1.0 8 - pin plug with the NBD Infinity200FC, and it has an 8 - Layer PCB with 2Oz Copper and BLHeli32 Programmable Sided RGB LED x4. The package includes 1x NewBeeDrone Infinity 200 45A 3 - 6S BLHeli_32 4 - in - 1 20x20 ESC, 4x short grommets, 4x long grommets, 5x 25mm steel screws, 13x nylon locknuts, 1x 30mm Infinity20 FC to Infinity20 ESC cable, 1x 50mm cable, 1x 85mm cable, and a 470uf 35v electrolytic capacitor. You can also browse more 4 - in - 1 ESCS, all ESC, and all NewBeeDrone products.

Using the NewBeeDrone Infinity200 ESC is easy. First, make sure your power source has a LiPo power input between 3S and 6S, as specified. Connect the ESC to your device using the provided cables and the JST1.0 8 - pin plug with the NBD Infinity200FC. The plug - and - play feature with the DJI Digital FPV System means you can start using it right away. When it comes to installation, use the 20x20mm mounting holes and the included screws and grommets. Be careful when soldering on the solder pads for signal and power. Remember, the stack is not included, so you're only working with the ESC. For maintenance, keep an eye on the heatsink to ensure it's not overheating. If the ESC is getting too hot, check your power settings. The BLHeli32 Programmable Sided RGB LED x4 can be programmed according to your preferences. Store the ESC in a dry and cool place when not in use, and handle it gently to avoid damaging the 8 - Layer PCB with 2Oz Copper.