RadioMaster Bandit BR1 ExpressLRS Receiver (915mhz)

Are you on the hunt for a top - notch RadioMaster Bandit BR1 ExpressLRS 915MHz receiver in Australia? Look no further! This receiver comes with a built - in TCXO, which guarantees stable, reliable, and accurate signal reception. It performs exceptionally well even in tough environments. Thanks to the use of 0402 components, it has excellent vibration resistance. The Bandit BR1 ExpressLRS Receiver is powered by an ESP8285 MCU and an SX1276 RF chip. It's well - known for low latency, high sensitivity, and great long - range performance. The included high - sensitivity T Antenna and Y Antenna are lightweight and easy to install as per your needs. With its low - latency and high - refresh - rate RF module, it's perfect for FPV freestyle or long - range use. Key features include a built - in TCXO oscillator, great vibration resistance from 0402 components, a lightweight and compact design, and high - sensitivity 915/868MHz T and Y Antennas. Specifications involve FCC915 regulatory domain, ESP8285 MCU, SEMTECH SX1276 RF chip, 50mw/17dbm telemetry RF power, and more. What's in the box? You'll get 1 Bandit BR1 ExpressLRS Receiver, 3 Receiver Shrink Tube Sleeves, 1 Y Antenna (already installed on the receiver), 1 T Antenna, 1 CRSF Wire, and 1 Manual.

Using the RadioMaster Bandit BR1 ExpressLRS Receiver is quite straightforward. First, choose either the T Antenna or the Y Antenna according to your application and install it on the receiver using the IPEX1 antenna interface. Then, connect the CRSF wire to the appropriate device. Make sure to use a DC 5.0V power supply for it to work properly. When it comes to maintenance, keep the receiver in a dry and clean place. Avoid exposing it to extreme temperatures or strong vibrations, as this might affect its performance. If you need to clean it, use a soft, dry cloth. Always refer to the manual if you encounter any problems or have specific questions about the receiver.