Silicone Soft Heat Proof Wire 1 Metre 26AWG Various Colours

Are you in the market for silicone heat proof wire? Remember to pick the right thickness for your needs. All prices are per meter. Here's an estimate of the max burst current for each thickness. The bold ones are in stock. 12AWG Wire - 160A (only available in XT60 Pigtail), 14AWG Wire - 120A, 16AWG Wire - 80A, 18AWG Wire - 45A, 20AWG Wire - 27A, 22AWG Wire - 17A, 26AWG Wire - Signals Only, 28AWG Wire - Signals only. 12 AWG is for XT60 pigtail in high - performance 5″ racing quads. 14 AWG is for XT60 pigtail in medium - power 5″ racing quads. 16 AWG is for XT30 and XT60 pigtail with low power up to 80A burst. 18 AWG is for XT30, ESC power, and motor wire extension up to 45A burst. 20 AWG is for motor wire extension. Connectors also have current limitations. Choose carefully to avoid system bottlenecks. Here's a general guide for connector ratings: JST connector - 5A (10A), 2mm bullet connectors - 20A (40A), XT30 - 30A (60A), XT60 connectors - 60A (120A). Our stocked wire is silicon and flexible, heat proof (up to 200 degrees maximum rating, except for signal wires), and has a tinned copper structure.

Using the silicone heat proof wire is easy. First, select the right thickness based on your power requirements. If you're using it for a high - performance 5″ racing quad, 12AWG might be a good choice. For a medium - power one, 14AWG would work. When connecting the wire, make sure to match the connectors properly. Always check the current ratings of both the wire and the connectors to avoid overloading. As for maintenance, keep the wire away from sharp objects to prevent cuts. Store it in a cool and dry place. If the wire gets dirty, you can gently clean it with a dry cloth. Remember, signal wires have different heat - proof ratings, so handle them with extra care.