Are you in Australia and eager to purchase the TBS Mini FPV White Noise x TBS Race Wire? The Race Wire is an ideal upgrade for your racing or freestyle drone. It replaces a part of the motor wires under the propeller tips, making your quadcopter resistant to prop strike damage. In case a prop gets bent during a crash, it'll just deflect off the Race Wire board, leaving only a scuff on the surface according to our tests. After installing the Race Wire, you can swap motors quickly without opening up your quad to reach the 4in1 ESC or AIO board. It also offers a flat surface for mounting top - facing LEDs. This Race Wire features a 2oz 2 - layer copper board. It has negligible differences in resistance and weight compared to the standard 20AWG motor wire. Specifications include a 2oz 2 - layer copper board, dimensions of 25 x 8 x 0.8mm, and it comes in a set of 6 individual boards. Remember, isolation between the carbon and the board is still required. You can also browse all TBS products, ESC Race Wires, and FPV items.
Using the TBS Mini FPV White Noise x TBS Race Wire is easy. First, find the section of your motor wires under the propeller tips and replace it with the Race Wire. This will make your quad more resistant to prop strike damage. When it comes to motor swaps, you don't need to open up your quad to access the 4in1 ESC or AIO board. Just use the Race Wire for a quick and hassle - free motor change. You can also mount top - facing LEDs on the flat surface of the Race Wire. As for maintenance, keep it clean and dry. Check for any signs of damage regularly, especially after a crash. And always remember, you need to isolate the carbon and the board to ensure proper functioning.
