ViFly 1S Series Parallel Charging Board BT2 & PH2

Are you in Australia and seeking to buy a ViFly 1S Series Charging Board? This charging board is a great choice. It can store and charge 1S LiPo batteries with a standard charger. You can charge 1 - 6 batteries simultaneously. Just turn the knob according to the number of batteries you're charging. An added fuse enhances the board's safety. It comes with pre - soldered PH2.0 and BT2.0 connectors. However, note that it's a series board, not a parallel one. When charging multiple lipos, set the charger current correctly. All batteries should have the same specs. Never leave the board unattended during charging or discharging. Don't charge over 1.5 amps, even though the fuse is 5A. Also, don't plug in both PH2.0 and BT2.0 batteries in the same port. Browse more ViFly products and chargers.

Using this ViFly 1S Series Charging Board is easy. First, make sure all the batteries you want to charge have the same capacity, type, and brand. Then, decide how many batteries you'll charge and turn the knob accordingly. Connect the batteries using the pre - soldered PH2.0 or BT2.0 connectors, but don't plug both types in the same port. Set your charger current correctly. For example, if you're charging 4pcs 300mAh lipos, set it to 0.3A for 1C or 0.6A for 2C. Never leave the board alone while it's charging or discharging. Also, don't try to charge at a current over 1.5 amps, even though the fuse is 5A. To maintain the board, keep it clean and dry. If you notice any problems, stop using it immediately.