ZOHD Lionpack 18650 2S1P 3500mAh 7.4V Li-ion Battery [DG]

Are you in Australia searching for a high - quality Li - ion battery? Look no further than the ZOHD Lionpack 18650 2S1P 7.4V battery. In our store, you can explore our wide range of 2s, Li - Ion, and general batteries. Lithium - Ion batteries are well - known in the RC & FPV world, especially for DIY enthusiasts. Compared to regular Lithium Polymer (lipo) batteries, Li - ions offer much longer flight times. That's why ZOHD created the Lionpack series. These high - performance batteries can double your flight time, and they're lightweight, safe, and powerful. Here are the amazing features: It uses original brand - new SANYO high - quality cells. Unlike Li - Po batteries, it won't puff up and become unsafe. You can charge it from empty or nearly full without harming the pack. It can be charged over 350 times and still retain 85% of its original capacity. With a high - quality fireproof heat - shrink outer skin and double heat - shrink over XT terminals for extra protection, it's compact and lightweight. It also comes with an extra XT30 - DC2.5 Converter (2S version), allowing you to power your FPV goggles with the same battery. It's an ideal power solution for all RC hobby products like cars and boats. There's an extra balance charger protector, a RED/GREEN XT30 Protector to show energy status, and ZOHD battery straps and Velcro to keep the battery in place. Specifications: The cell model is SANYO NCR18650GA with a capacity of 3500mAh. The nominal voltage is 7.4V, constant current is 1550mA. The maximum charge voltage is 4.2V per cell with a max. charge current of 3.2A, and end voltage is 2.5V per cell. The maximum continuous discharge current is 10A, weight is 108g/3.81oz, dimensions are 70mm * 38mm * 19.4mm, power lead is 100mm / 3.94in XT30, and balance lead is 40mm / 1.57in XH2.54. What's included: 1 x 2S1P 18650 3500mAh Li - ion Battery, 1 x XT30 - DC2.5 Converter, 1 x RED/GREEN XT30 Protector / Indicator, 1 x Balance charger protector, 1 x Velcro, 2 x ZOHD Battery Strap, 2 x ZOHD Decal.

Using the ZOHD Lionpack 18650 2S1P 3500mAh 7.4V Li - ion battery is easy. First, make sure to connect the battery properly to your device. You can use the XT30 power lead for most connections. If you want to power your FPV goggles, use the included XT30 - DC2.5 Converter. When charging, don't worry about starting from an empty or nearly full state, as this battery can handle it. Just follow the recommended charging parameters: a maximum charge voltage of 4.2V per cell and a max. charge current of 3.2A. Use the balance charger protector to avoid damaging the charging wires. Keep in mind some safety rules. Don't over - discharge the battery. The end voltage per cell should be 2.5V. Also, always use the RED/GREEN XT30 Protector to check the energy status and protect the connector. For maintenance, store the battery in a cool and dry place. The high - quality fireproof heat - shrink outer skin and double heat - shrink over XT terminals provide good protection, but still handle it with care. Use the ZOHD battery straps and Velcro to keep it in place during use. If you notice any unusual swelling or damage, stop using the battery immediately.