Product Information
Are you in Australia searching for Bambu Labs' 1kg, 1.75mm PA - CF Filament made of carbon fiber nylon? Bambu PA - CF is a top - notch 3D printing engineering filament series. It combines PA6, PA12, and carbon fiber. PA12 reduces water absorption, and PA6 enhances stiffness, strength, and temperature resistance. Bambu PA - CF mixes them in the best ratio, so it keeps its mechanical properties even after getting wet.
Printing Tips:
1. Because carbon fiber is abrasive, we recommend a 0.6mm hardened steel nozzle.
2. To limit water absorption, use sealed printing and storage. Put it in AMS with a desiccant when printing, and use an aluminum foil sealed bag for storage.
3. If it has absorbed water, dry it at 80°C for 8 - 12 hours before printing.
Bambu Labs ABS Colour List:
- Bambu Labs ABS Black
- Bambu Labs ABS White
- Bambu Labs ABS Blue
- Bambu Labs ABS Red
- Bambu Labs ABS Yellow
Browse more filaments like Prusament, ASA, ABS, Nylon, PC, PETG, PLA, PVA, Silk, SLA Resin, Speciality, and TPU. Also, check out all our 3D printing supplies.
Using the Bambu Lab PA - CF Filament is straightforward. First, make sure you're using a 0.6mm hardened steel nozzle because the carbon fiber in the filament is abrasive. This will help the printing process go smoothly. When it comes to storage and printing, it's important to keep the filament dry. For printing, you can put it in an AMS with a desiccant. And when you're not using it, store it in an aluminum foil sealed bag. If by chance the filament has absorbed water, don't worry. Just dry it at 80°C for 8 - 12 hours before you start printing. This will ensure the filament performs at its best and maintains its mechanical properties. You can choose from a variety of Bambu Labs ABS colors to add a personal touch to your 3D prints.
