Are you in Australia and eager to buy Sunlu PLA Carbon Fiber? This new arrival in Australia is a great choice. It gives you the carbon fiber look without the need to print with 100% carbon fiber filament. With small carbon fiber particles, it's slightly stronger than standard PLA and offers a carbon fiber aesthetic. Note that it's best to use a Hardened Steel Nozzle, Nozzle X, or Vanadium as this filament can wear down standard brass nozzles. Sunlu, the maker of our favorite Filament Dryer, recommends always drying your filament for optimal print results, even if it's factory - sealed. This filament is 100% biodegradable and FDA food safety approved. It has a marble PLA - like appearance, a glossy surface, and a smooth texture. There are no wire - drawing issues, resulting in smoother and more delicate printouts. It also has a low material shrinkage rate and a uniform diameter. The best printing temperature is 190 - 220℃, bed temperature is 0 - 60℃, printing speed is 30 - 90mm/s, and movement speed is 90 - 150mm/s. On our Prusa MK3 printer farm, we print at 215 degrees and a 65 - degree bed temperature. Other factors like speed and layer height depend on your desired print quality. You can also browse more Sunlu and other types of filaments such as ASA, ABS, Nylon, PC, PETG, PLA, PVA, Silk, SLA Resin, Speciality, and TPU filaments.
Using this Sunlu PLA Carbon Fiber filament is easy. First, make sure you have the right nozzle - a Hardened Steel Nozzle, Nozzle X, or Vanadium is recommended as the filament can wear down standard brass ones. Before printing, always dry the filament, even if it's sealed from the factory, for the best results. Set your printer's temperature between 190 - 220℃ for printing and 0 - 60℃ for the bed. Print at a speed of 30 - 90mm/s and move at 90 - 150mm/s. The speed and layer height can be adjusted according to the quality you want. As for maintenance, keep the filament in a dry place. And remember, it's 100% biodegradable and FDA food - safe, so it's both eco - friendly and safe to use.
