Are you in Australia looking for top - notch 3D printing filament? Look no further than Polymaker PolyLite Galaxy ABS! PolyLite is a family of 3D printing filaments crafted from the finest raw materials, offering outstanding quality and reliability. It caters to everyday design and prototyping needs with popular 3D printing materials. PolyLite Galaxy ABS is a high - quality ABS with reflective glitter inside, creating a stunning starry galaxy effect. It's made from a specialty bulk - polymerized ABS resin, which means significantly less odor during printing compared to traditional ABS. Key features include: a captivating starry galaxy effect for stand - out applications; reduced odor for a more pleasant printing experience; balanced mechanical and thermal properties, outperforming regular PLA and PETG in toughness and with a heat resistance up to 100°C; excellent printing quality, perfect for models, prototypes, and production parts; and uncompromised quality thanks to Polymaker's strict quality control. Specifications: Net weight is 1kg, material type is Galaxy ABS, density is 1.12 g/cm3 at 21.5˚C, and color is Galaxy Black. Printing settings: Nozzle temperature should be 245°C - 265°C, build plate temperature 90°C - 100°C. It works well with most build surfaces like glass and BuildTak®, and rigid build plates are recommended. Apply Magigoo Original or PVA glue for better adhesion. An enclosure is recommended, and a heated chamber is needed for some geometries. Set the cooling fan to LOW for better surface quality or OFF for better strength. Printing speed should be 30 mm/s - 50 mm/s. Retraction settings vary by printer. Self - support is the recommended support material. Note that these are recommendations for a 0.4 mm nozzle, and ideal conditions may vary with your 3D printer. For high - speed printers, increase extrusion temperature. PolyLite Galaxy ABS is engineered for compatibility with a wide range of professional 3D printers, but we can't guarantee it will work with every model on the market.
Using the Polymaker PolyLite Galaxy ABS 3D printing filament is a breeze. First, make sure your 3D printer is set up according to the recommended settings. Set the nozzle temperature between 245°C and 265°C, and the build plate temperature from 90°C to 100°C. You can use most build surfaces like glass or BuildTak®, but rigid build plates are better. Apply Magigoo Original or PVA glue to the build surface to help the filament stick well. An enclosure around your printer is a good idea, and for some larger or denser models, a heated chamber at 70˚C or more is recommended. When it comes to the cooling fan, use LOW for a better surface finish on your print, or turn it OFF if you want more strength. Print at a speed of 30 mm/s to 50 mm/s. Retraction settings depend on your printer type, so follow the suggested settings as a starting point. As for support material, this filament can mostly support itself. Remember, these settings are based on a 0.4 mm nozzle, and you might need to adjust them for your specific 3D printer. If you have a high - speed printer, increase the extrusion temperature to print faster. When storing the filament, keep it in a dry place to prevent moisture absorption, which can affect the printing quality. Also, handle the filament gently to avoid any kinks or breaks. That's it! Now you're ready to create amazing 3D prints with this fantastic filament.
