Are you in Australia and looking to buy Matte PLA? Phaser3D Premium Matte Filament, our in - house brand, offers the best - looking matte filament on the market. Note that matte filaments are more brittle, chalky, and flexible than standard pla+ filaments. They're great for design and aesthetics but not ideal when you need strength and engineered properties. We have these great matte PLA+ colours: PLA Matte Black, PLA Matte Grey, PLA Matte White, PLA Matte Blue, PLA Matte Green, and PLA Matte Purple. Here are the print settings: Nozzle Temperature should be between 190˚C and 230˚C, Printing Speed from 30mm/s to 70 mm/s, Bed Temperature at 60˚C, and the Cooling Fan should be ON (this is based on a 0.4 mm nozzle and Simplify 3D v.3.1. Printing conditions may change with different printers and nozzle diameters). Also, you can browse other filaments like Prusament, ASA, ABS, Nylon, PC, PETG, PLA (including PLA+), PVA, Silk, SLA Resin, Speciality, and TPU. Check out all our 3D printing supplies.
Using this Phaser3D Premium Matte PLA Filament is easy. First, set your printer's nozzle temperature between 190˚C and 230˚C, the printing speed from 30mm/s to 70 mm/s, and the bed temperature at 60˚C. Make sure to turn on the cooling fan. But remember, these settings are based on a 0.4 mm nozzle and Simplify 3D v.3.1, and they might change with different printers and nozzle sizes. Since this matte filament is more brittle, chalky, and flexible than standard pla+ filaments, it's mainly for design and aesthetics. Don't use it when you need high strength. When it comes to storage, keep it in a dry place to maintain its quality. And if you want to explore other filaments, we have a wide range for you to browse through.
