Are you in Australia and looking to buy high - quality flexible filament? PolyFlex™ is a top - notch family of flexible materials. PolyFlex™ TPU95, a thermoplastic polyurethane (TPU) filament, is engineered for most desktop 3D printers. With a shore hardness of 95A, it can stretch over 3 times its original length, offering excellent flexibility, impact resistance, and durability. It has a high elongation at break of up to 330% and fewer printing requirements compared to other flexible filaments. To ensure the best printing results, we suggest using it with the Sunlu Filament Dryer. Print Settings: Nozzle Temperature 210˚C – 230˚C, Printing Speed 20mm/s – 40mm/s, Bed Temperature 25˚C – 60˚C, Bed Surface can be glass with glue, blue tape, or BuilTak®, and keep the Cooling Fan ON. PolyFlex Specifications: 100% Modulus is 9.4 ± 0.3 Mpa, Tensile Strength is 29 ± 2.8 Mpa, Elongation at Break is 330.1 ± 14.9 Mpa, and Shore Hardness is 95A. Also, you can browse more related filaments like ASA, ABS, Nylon, and more.
Using the Polymaker PolyFlex TPU95 filament is easy. First, set your 3D printer's nozzle temperature between 210˚C and 230˚C, printing speed from 20mm/s to 40mm/s, and bed temperature from 25˚C to 60˚C. You can use a bed surface like glass with glue, blue tape, or BuilTak®. Make sure to keep the cooling fan on during printing. Remember to use the Sunlu Filament Dryer to keep the filament dry for the best results. When it comes to maintenance, store the filament in a dry place to prevent moisture absorption. If you notice any issues during printing, check the temperature settings and the dryness of the filament. With proper use and care, this filament will serve you well for all your 3D printing needs.
