Sunlu Filadryer S1 + Filament Dryer Storage Box (With Fan)

Are you in Australia and searching for a high - quality filament dryer? The Sunlu Filadryer S1 + Filament Dryer Storage Box is here to solve your humidity problems. It comes with an integrated fan, ensuring a more even temperature throughout the dryer. Protect your filaments from being damaged by humidity. The S1+ model has a built - in fan, unlike the regular S1. Our Phaser FPV ultimate filament drying guide will help you make the most of this dryer. Use the Sunlu Filament Dryer to dry your filament and mount it during printing. Monitor the humidity inside with our Humidity Sensor and Humidity Mount. After printing, store your filaments in airlock bags and use the NanoVac Pump to remove air. Place a Humidity Sensor in the spool adapter to check the humidity when you're ready to print again. Stacking filaments in airlock bags is possible, but beware of sharp filament ends that can puncture the bags. If you face a clogged nozzle, our nozzle cleaning filament can come to your rescue. Features: 1. 2 - inch LCD display shows temperature and time. 2. Dual temperature probes measure cabinet and heating plate temperatures. 3. Wrapped baking ensures more uniform heating and better results. 4. Adjustable heating temperature (35℃ - 55℃) for different materials. 5. Timing function for safe and secure operation. Specifications: Name: S1 Filament Dryer Box Color: Not specified Temperature range: 35 - 55℃ Plug: Not specified Filament Diameter: 1.75mm/2.85mm/3.00mm Browse more: - All Filament Dryers - All Sunlu products

Using the Sunlu Filadryer S1 + is easy. First, place your filaments inside the dryer. You can set the heating temperature according to the material you're using, with a range from 35℃ to 55℃. Use the 2 - inch LCD display to set the time and monitor the temperature. The dual temperature probes will give you an accurate reading of the cabinet and heating plate temperatures. The integrated fan ensures a uniform temperature inside. When printing, you can use the dryer mount to keep the filament dry. Attach the humidity sensor and humidity mount to check the humidity level inside the dryer. After printing, transfer the filaments to airlock bags and use the NanoVac Pump to remove air. This helps keep the filaments dry for the next use. Place a humidity sensor in the spool adapter to know the humidity of the spool when you're ready to print again. If you notice a clogged nozzle, use our nozzle cleaning filament. Some things to keep in mind: Be careful of sharp filament ends as they can puncture the airlock bags. When stacking filaments in the bags, make sure they don't damage each other. Also, regularly check the temperature and humidity sensors for accurate readings. Keep the dryer clean to ensure optimal performance.