Are you in Australia and eager to purchase the Polymaker PolyTerra Dual Matte PLA Filament? This 1kg, 1.75mm filament offers a smooth matte surface with a dynamic colour - changing effect. Made with Polymaker's Jam - free™ technology, it ensures a hassle - free printing experience.
Key features include:
- It's a matte dichromatic or dual - colour filament, perfect for creating eye - catching 3D prints.
- The sustainable Polymaker Matte PLA formula is sourced naturally, being eco - friendly.
- The smooth matte finish hides print layers, giving your models a professional look.
- It's engineered for easy support removal, saving you time and effort.
- Capable of high - speed printing on suitable hardware, boosting your productivity.
- Compatible with a wide range of 3D printers, providing great versatility.
- Jam - free™ technology enhances compatibility with all - metal hotends, preventing nozzle jams.
- Comes with sustainable cardboard spool and packaging, reducing environmental impact.
PolyTerra™ PLA Dual is a dichromatic matte 3D printing filament with two distinct colours, creating a striking dual - coloured effect on your models. Based on the PolyTerra™ Matte formula, this bioplastic filament offers ease of use, high - quality printing, speed, and reliability. It's the ideal choice for hobbyists, educators, and small businesses looking to create vibrant and smooth - finished models.
Using the Polymaker PolyTerra Dual Matte PLA Filament is easy. First, make sure your 3D printer is compatible with this filament. You don't need a heated bed, but setting it at 40 - 50°C (max 60°C) can give better results. Apply a thin layer of glue stick on the printing surface. When slicing your model, try to ensure that the outside perimeters of each layer are printed in the same direction for the best dual - colour effect. Check the slicer preview to view the tool path direction.
Be careful with the filament while feeding it. Since it's wound carefully for correct colour alignment, avoid twisting it in the feeding path. Excessive twisting can cause a striping effect, which might not be desirable for some. Using a high - quality dual - geared direct drive extruder and mounting the spool straight can help reduce this.
For the best visual effect, use a smaller melt - zone hotend. Volcano - style hotends or CHT - style nozzles can mix the colours and reduce the dual - colour effect. You can print an alignment coin to figure out where the colour change will occur.
When it comes to storage, it's recommended to keep the filament in the PolyBoxTM to prevent moisture absorption. If the filament has absorbed moisture, dry it at 55°C for 6 hours in a convection oven. Remember, the values in the data sheet are for reference only and not for design or quality control.
