Are you in Australia and looking to purchase Sunlu PLA Twinkling 3D Printer Filament? This PLA filament is newly introduced to the Australian market. When we tested it, the prints came out in really vivid colors. You might also want to explore the Sunlu PLA+ Filament for more color options and extra strength. Sunlu is the maker of our favorite Filament Dryer. To get the best print results, always dry your filament, even if it's factory - sealed. Sunlu PLA can be used on any 1.75mm compatible FDM printer, including well - known brands like Prusa, Creality, Makerbot, Reprap, UP, Afinia, Flash Forge, and many others. The Sunlu PLA Twinkling filament is made from extracted and purified corn grain. It has high rigidity, great glossiness, and transparency. It's perfect for printing large and complex models without the worry of cracking. It also has a low material shrinkage rate and a uniform diameter. The recommended print settings are: Best Printing Temperature: 200 - 220℃, Bed Temperature: 0 - 70℃, Printing Speed: 30 - 90mm/s, and Movement Speed: 90 - 150mm/s. On our Prusa MK3 printer farm, we print at 215 degrees with a 65 - degree bed temperature. Other factors like speed and layer height depend on the print quality you want. Available colors are Black Twinkling and Blue Twinkling. You can also browse other types of filaments like Sunlu Filament, ASA Filament, ABS Filament, and more.
Using the Sunlu PLA Twinkling 3D Printing Filament is easy. First, make sure your 1.75mm compatible FDM printer is ready. Set the printing temperature between 200 - 220℃ and the bed temperature between 0 - 70℃. You can adjust the printing speed from 30 to 90mm/s and the movement speed from 90 to 150mm/s according to the quality you want. Before using the filament, even if it's sealed from the factory, dry it to get the best print results. When printing, this filament is great for large and complex models as it won't crack easily. It has a low shrinkage rate, so your prints will turn out accurate. For maintenance, store the filament in a dry place to keep it in good condition. If you want more color options and extra strength, you can also check out the Sunlu PLA+ Filament.
