Bambu 3D Effect Plate is a must - have for your 3D printing. It can transfer amazing surface textures to your printed objects. This set comes with 4 thrilling textures, including Carbon Fibre, Starry, Galaxy, and Diamond. The Galaxy Surface gives a vivid galaxy rainbow effect on the first layer, glittering and changing color with the viewing angle, and works great with silk or shiny filaments. The Carbon Fiber Surface has a texture like real carbon fiber, creating a 3D effect on the 3D - printed model's first layer, especially with grey carbon filament. The Starry Surface transfers a rainbow kaleidoscope starry effect on the first layer, also best paired with silk or shiny filaments. The Diamond Surface imprints a diamond pattern on the first layer with a mix of glossy and matte shapes. For installation, download the 'Fixture tool' STL file from the provided link. For best results, use it on Bambu Lab's official steel plate. You can also use it on the Bambu Engineering Plate. Remember to set the plate type to Smooth PEI/High Temp Plate and follow the Heatbed Recommended Settings. Keep the surface clean to maintain the patterns visible. We recommend using PLA and TPU filaments for printing and adjusting other slicer settings according to the model and filament requirements.
Hey there! Using the Bambu 3D Effect Plate is super easy. First, download the STL file of the 'Fixture tool' for installation. You should apply the plate on Bambu Lab's official steel plate or the Bambu Engineering Plate. Make sure to clean the surface well before installing it, removing any previous sheets and glue residue. When using it, set the plate type to Smooth PEI/High Temp Plate and follow the recommended heatbed settings. For the best look, use PLA or TPU filaments. Now, here are some things to keep in mind. Because of reflections, the LIDAR calibration might not work right, so you can skip it or calibrate with a regular plate. These plates are consumables, so to make them last longer, place your print objects on different areas of the sheet. Don't put glue on the sheet surface, and be really careful when using a scraper to remove prints to avoid damaging it. And always keep the surface clean using hot water and detergent, and don't touch it with your hands too much. That's it! Have fun printing with unique textures.
