The E3D & Bambu Lab ObXidian High Flow HotEnds result from an official collaboration between E3D and Bambu Lab. They offer a compact, lightweight, and high - performing solution. With E3D's High Flow technology, the volumetric flow rate of the HotEnd is increased by 60%! This allows for reliable and consistent extrusion at the same speeds or lets you fully utilize the motion system's capabilities by raising the volumetric flow rate limit in the slicer. The E3DLC™ coating on the nozzle and heater parts provides extra abrasive resistance for fibre - filled materials and prevents plastic build - up. It has the same form factor as the stock Bambu, so you can reuse your temperature sensor and heater pads without adjusting the mount or part cooling. It's compatible with the X1, X1 Carbon, P1S, and P1P. The package includes a Bambu Lab High Flow ObXidian HotEnd (0.40 mm or 0.60mm), thermal grease, a Bambu Lab sock, a Bambu Lab heater retaining spring, and 2 Bambu Lab bolts.
Using this E3D High - Flow ObXidian Hotend is easy. First, make sure your printer is turned off. Reuse your existing temperature sensor and heater pads and simply place the hotend in the mount without any adjustments. When you start using it, you can either keep the same printing speed for more reliable extrusion or increase the volumetric flow rate limit in your slicer software to make full use of your printer's motion system. For maintenance, be aware that the E3DLC™ coating on the nozzle and heater parts offers protection. But still, clean the nozzle regularly to prevent any blockages. If you're using fibre - filled materials, the coating will help resist abrasion. Always store the hotend in a dry and clean place when not in use. And remember, it's compatible only with the X1, X1 Carbon, P1S, and P1P models of Bambu Lab printers, so don't try to use it with other printers.
