Are you in Australia and seeking a high - quality build plate for your Prusa MK3S? Look no further! Our double - sided build plate is a game - changer. One side features a smooth PEI layer, while the other side is textured and comes in a stunning gold color. The textured side has a red Phaser FPV logo at the bottom, and the smooth side has a transparent Phaser FPV logo. Note that this bed is made by a third - party, not Prusa. With a PEI - coated build sheet, you can take your 3D printing to new heights. No more hassle with glue sticks or painters tape! Simply clean the bed with isopropyl alcohol, hit print, and when the job is done, flex the build sheet, and the print will effortlessly pop off. The advantages are numerous. It never warps or rusts, makes it easy for new users to get the first layer right, is flexible, removable, and sticks to magnets perfectly. It suits a variety of filaments, especially PLA. Cleaning is a breeze; just flex the plate a bit after the print cools. It also has fast heater performance, reducing waiting time. This is truly a lifetime 3D printer bed. The smooth PEI side is 0.2MM thick with 3M468 tape. The material is 100% real Ultem1000 (PEI) in amber color with a matte surface, made in Europe. The spring steel sheet is flat, flexible, and adheres to the bed magnet extremely well. The PEI comes with pre - applied 3m tape, bubble - free. Recommended print temps are: PLA – 60C, HTPLA – 60C, PETG – 70 - 80C, PCTG – 70 - 80C, ABS – 100C.
Using this build plate is easy. First, clean the bed with isopropyl alcohol before starting a print. Select the appropriate print temperature based on the filament you're using (PLA at 60C, HTPLA at 60C, PETG and PCTG at 70 - 80C, ABS at 100C). When printing PETG, PCTG, or TPU, apply hairspray or PVA gluestick to the PEI surface to prevent bonding and damage. After the print is finished, wait until the plate is close to room temperature (under 30C) before removing the print. To remove the print, simply take out the spring steel plate, flex it a bit, and the print will pop off. Maintenance is simple. Keep the plate clean by wiping it with isopropyl alcohol. Store it in a dry place to avoid rust. If you notice any debris on the PEI surface, gently clean it with a soft cloth and alcohol. This will ensure your build plate lasts a long time and provides great printing results every time.
