Are you in Australia looking to buy a DDX V3 Kit for your Ender or CR10? The DDX v3 is a breeze to install. With its integrated fan shroud and mount, installation becomes even simpler. You can snap the fan to the shroud without using screws and adjust the shroud's height with a single front - access screw.
When it comes to using a bed probe with DDX, it's designed to leave space for attaching the bed probe to the x - carriage. For models like those without space for a BLtouch on the X - carriage, you can print a mount and attach it to the right - hand side of the DDX.
The Bondtech DDX Direct Drive Extruder is a high - performance, reliable 1.75mm Dual Drive extruder for Creality 3D printers, based on the popular BMG. Its unique Dual - Drive technology, combined with either the factory hotend or industry - leading hotends like Copperhead™ or Mosquito™ from Slice Engineering, ensures trouble - free material feeding and allows you to use a wider range of materials. The housing parts, printed with PA12 (polyamide) using industrial - grade SLS technology, offer maximum strength and precision.
This extruder for Creality gives you more options, like using different materials, achieving higher flow or using wider nozzles, and printing thinner layers for better quality. Based on the BMG Bondtech Mini Geared extruder with unique Dual - Drive technology, the DDX housing effectively cools the Hot - End. With a 3:1 gearing ratio, you can achieve high - resolution prints with small nozzles or high - flow prints with bigger nozzles.
Setting up is a cinch as the kit attaches to the carriage with just 2 screws.
The product includes: 1x DDX v3 Extruder, 1x Nema17 Pancake stepper motor, 1x Thumbscrew Assembly, 1x 70cm Stepper motor extension cable, 1x 60cm PTFE tube, 1x 7cm Capricorn tube, 4x Zip - ties, 3x M3x12mm screw, 2x M3x20mm screw, 1x M3 square nut, 1x M3x10mm button head screw, 1x 10079 - 3 PA12 Fan Shroud, and 1x SLS Ender Hotend Adapter.
Browse more Bondtech Extruders, all Bondtech products, and 3D Printer Parts.
Using the Bondtech DDX v3 for your Creality 3D printer is quite straightforward. First, attach the kit to the carriage using just 2 screws. Then, you can easily snap the fan to the shroud without using screws and adjust the height of the shroud with a front - access screw. When using a bed probe, if there's space on the x - carriage, attach it there. If not, print a mount and attach it to the right - hand side of the DDX.
As for materials, you can use a wide range thanks to the Dual - Drive technology. Whether it's with the factory hotend or high - end ones like Copperhead™ or Mosquito™, you'll have trouble - free feeding.
Here are some important things to note. Make sure the screws are tightened properly during installation to avoid any loose parts during printing. When handling the stepper motor and cables, be gentle to prevent any damage.
For maintenance, keep the extruder clean. Regularly check the gears and the moving parts for any debris or wear. You can use a soft brush to clean the housing and the fan. Also, check the PTFE and Capricorn tubes for any signs of blockage or damage. If you notice any issues, replace the parts as needed. With proper use and maintenance, your Bondtech DDX v3 will serve you well for a long time.
