Looking to buy a PEI - coated spring steel bed sheet for your Artillery Sidewinder X1 or CR10s in Australia? You're in the right place!
This double - sided bed offers a smooth PEI layer on one side and a textured gold side on the other. The textured side features the 'PHASER FPV' logo in red at the bottom, while the smooth side has a transparent Phaser logo at the bottom.
Upgrade your 3D printing experience with this PEI - coated build sheet. No more hassles with glue sticks or painters tape. Just clean the bed with isopropyl alcohol, start your print, and when it's done, flex the build sheet and the print will effortlessly pop off.
Advantages:
- Warp - free and rust - free.
- New users can easily achieve a perfect first layer.
- Flexible, removable, and adheres well to magnets.
- Compatible with various filaments, especially PLA.
- Self - cleaning: just flex the plate after cooling to remove prints.
- Fast heating for efficient printing.
- A long - lasting 3D printer bed.
Features
0.2MM thickness with 3M468 tape. Our spring steel sheet is flat and has a strong magnetic base (1.5MM, 300LSE tape, magnetism - 600GS, high - temperature resistance up to 130C for long periods).
Material:
- 100% real Ultem1000 (PEI) in amber color with a matte surface, made in Europe.
- The spring steel sheet is flat, flexible, and sticks well to the bed magnet.
- Pre - applied 3m PEI tape with no bubbles.
Recommended print temps
- PLA – 60C
- HTPLA – 60C
- PETG – 70 - 80C
- PCTG – 70 - 80C
- ABS – 100C
Product Usage Guidelines
- For PETG/PCTG/TPU: To prevent bonding these materials to the PEI surface and causing damage, apply hairspray or PVA glue stick before printing.
- Part Removal: Wait until the plate is close to room temperature (under 30C) before removing parts to avoid surface damage.
- Removing 3D prints is a breeze. Just take out the spring steel plate, flex it, and the print will come off easily.
Browse more
- Browse all Spring Steel Bed Sheets
- Browse all Artillery Sidewinder Spare Parts
- Browse all Printer Spare Parts
Using this 3D printer build plate is super easy. First, clean the plate with isopropyl alcohol before starting a print. For different filaments, use the recommended print temperatures. For example, set it to 60C for PLA and HTPLA, 70 - 80C for PETG and PCTG, and 100C for ABS. When printing PETG, PCTG, or TPU, it's a good idea to apply hairspray or PVA glue stick on the PEI surface to prevent damage. After the print is done, wait until the plate is close to room temperature (under 30C) before removing the parts. To remove the 3D print, simply take out the spring steel plate, give it a little flex, and the print will pop off. This plate is warp - free and rust - free, so there's no need to worry about long - term damage. Just keep it clean with alcohol when needed, and it will last you a long time in your 3D printing journey.
