Product Information
Are you in Australia and seeking a top-notch 3D printer bed? Look no further than our Energetic 410x410mm double-sided textured black PEI PRO spring steel sheet, perfect for Ratrig printers! This double-sided bed comes without a magnet. The textured side is black and in the PEI PRO HF Version, featuring the Phaser FPV logo in red at the bottom. Crafted by Energetic, it takes your 3D printing to a new height. With a PEI-coated build sheet, say goodbye to glue sticks and painters tape. Just clean the bed with isopropyl alcohol, press print, and after completion, flex the sheet to effortlessly remove the print. Advantages? It never warps or rusts. New users can easily achieve a great first layer. It's flexible, removable, and sticks well to magnets. Suitable for various filaments, especially PLA. Cleaning is a breeze - just flex the plate a bit after cooling. It heats up fast, reducing waiting time. This is truly a lifetime 3D printer bed. Our spring steel sheet is flat, with a strong magnetic base (1.5MM, 300LSE tape, magnetism - 600GS, high temp resistance up to 130C for a long time). Made in Europe, it's 100% real Ultem1000 (PEI) with an amber color and matte surface. The PEI has pre - applied 3m tape, bubble - free. Recommended print temps: PLA – 60C, HTPLA – 60C, PETG – 70 - 80C, PCTG – 70 - 80C, ABS – 100C.
Using this spring steel sheet is easy. First, clean the bed with isopropyl alcohol before starting a print. Then, set the recommended print temperature according to the filament you're using. For example, use 60C for PLA and 100C for ABS. When printing PETG, PCTG, or TPU, to avoid bonding the material to the PEI surface and damaging it, apply hairspray or PVA gluestick before printing. After the print is done, wait until the plate is close to room temperature (under 30C) before removing the parts. You can easily remove the 3D print by taking out the spring steel plate, flexing it, and popping the print off. For maintenance, keep it clean with isopropyl alcohol. Since it doesn't warp or rust, you don't have to worry about major damage, but always handle it gently to maintain its flatness and magnetic properties.
