Are you in Australia and want to buy a Rapido Plus Hotend 2? It features an aluminum heatsink for great heat dissipation, a titanium heatbreak for excellent thermal insulation, a plated copper extended heatblock to melt filaments faster and achieve higher printing speeds, a titanium alloy supporting screw with extremely low heat conduction and high strength, and a plated copper nozzle that can resist high temperatures. Key features include superior heatbreak thermal isolation to reduce filament clogging and handle fiber - filled filaments, a high - efficiency rectangular ceramic heating unit reaching 200°C in just 35s with a max printing temp of 350°C, a detachable PT1000 temperature sensor for high - temp printing, ultra - high - speed printing with a long - heating - area heater block allowing up to 75mm³/s flow rates, easy switching between high - flow and ultra - high - flow modes using a copper - nickel - plated nut adapter, one - handed nozzle changes thanks to low - thermal - conductivity titanium - alloy screws, and the ability to choose the right nozzle for different print jobs. Rapido 2 has the same shape, size, appearance as Rapido and is directly replaceable. It measures 22.3*22.3*79.2mm, comes in blue, black, or magenta, weighs 54.5g, and is compatible with a wide range of thermoplastic filaments. Included items are a collet clip, bowden collet, hex keys, screws, heater and temperature sensor extension cables, an open spanner (for Rapido Hotend 2 UHF), a leaf spring, cable ties, and thermal grease.
Using the Phaetus Rapido Plus Hotend 2 is quite straightforward. First, make sure you've chosen the right nozzle for your print job. Then, install the hotend onto your 3D printer following the included instructions. Connect the heater extension cable and the white temperature sensor extension cable properly. When you start a print, the high - efficiency heating unit will quickly heat up to your desired temperature. You can switch between high - flow and ultra - high - flow modes easily by using the copper - nickel - plated nut adapter depending on your printing needs. For maintenance, regularly check the thermal grease to ensure good heat transfer. Keep the heatsink clean to maintain its heat - dissipation ability. When changing nozzles, you can do it with one hand thanks to the design. If you encounter filament clogging, check the heatbreak as it's designed to reduce this risk. Always follow the safety guidelines when handling high - temperature components. And remember, this hotend is compatible with a wide variety of thermoplastic filaments, so feel free to experiment with different materials for your 3D printing projects.
