4-Way Parallel Charging Harness Cable - PH2

Charge four single-cell lipo batteries simultaneously with a regular hobby charger. This adapter fits 205mAh packs with PH2 connectors. It's crafted with top - notch materials, featuring the best plugs, thick wires, and a high - quality silicon coating. When parallel charging, it's advisable to keep all packs at similar voltages. Avoid having a fully discharged pack and a nearly charged one on the board at the same time. To use, simply plug the cable into the charger, connect four discharged batteries, and charge at 1S voltage and combined 1C current. For 4x 205mAh batteries with a combined capacity of 820mAh, a 1C charge rate is 0.82A. You can charge at up to 2C (1.64A), but 1C is better for battery longevity.

Hey there! Using this 4 - way parallel charging harness cable is a breeze. First, take the cable and plug it into your regular hobby charger. Then, connect four discharged 205mAh single - cell lipo batteries with PH2 connectors to the cable. When it comes to charging, set it at 1S voltage and the combined 1C current. For these four 205mAh batteries, the combined capacity is 820mAh, so a 1C charge rate is 0.82A. You can go up to 2C (1.64A), but if you want your batteries to last longer, stick with 1C. Now, here's an important tip: make sure all the battery packs are at a similar voltage when you're parallel charging. Don't put a fully discharged pack and a nearly charged one on the board at the same time. As for maintenance, keep the cable in a dry place and avoid bending the wires too much. That way, your charging cable will serve you well for a long time.