Are you in Australia and eager to buy the Beta95X V3 Whoop Quadcopter? Great news! The Beta95X V3 pusher whoop drone is officially out. As the upgraded version of Beta95X V2, it features a brand - new pusher design and a more powerful setup, offering pilots a seamless flying adventure. With a built - in mount for the SMO 4K and a 'pusher - style' inverted frame with a low center of gravity, it's a perfect match for the SMO 4K camera. During FPV flight, you'll get incredibly stable and clear 4K footage. You can use DJI FPV goggles with the Beta95X V3 HD Digital VTX. Besides, we've launched the SMO 4K camera. Key features: It's ideal for the SMO 4K action camera. With a built - in mount and power cable, camera installation and power input are a breeze. Paired with the SMO 4K, you'll enjoy stable and high - quality FPV flight videos. Its innovative pusher frame, made of PA12 material, is abrasion - resistant, dampens noise and vibrations, and has an EVA foam cushioning for safe flights. Equipped with F4 AIO 20A Toothpick FC V4, 1106 3800KV motor, and D63 5 - blade props, it has a powerful and quiet power system. We recommend the BETAFPV 450mAh 4S battery for the best experience. The reversed - motor design and top battery placement center the drone's gravity, making it highly maneuverable for FPV freestyle tricks. The improved shock mitigation system keeps the camera stable in flight, ensuring clear videos of every moment. Specifications: Item: Beta95X V3 Whoop Quadcopter; Weight: 99.1g (without battery); Wheelbase: 95mm; FC: F4 AIO 20A Toothpick FC V4; Frame: Beta95X V3 Frame Kit; Motors: 1106 3800KV Brushless Motor; Props: Gemfan D63 5 - Blades Props; Receiver Option: Frsky FCC/Frsky LBT/TBS/PNP; Camera: EOS Camera; FPV Camera Degree: 25° - 45°; VTX: M02 25 - 250mW 5.8G VTX; Camera Mount: SMO 4K camera Mount; HD Camera Mount Degree: 5° - 45°; Antenna: Air 5.8GHz Antenna (RHCP); Battery: 450mAh 4S battery (Not included); Charge Connector: XT30; Flight time: About 4.5 min with 450mAh 4S battery. The BETAFPV SMO 4K Camera is a lightweight action camera for FPV drones, developed with Insta360 technology. Weighing only 30g, it fits well with various FPV drones, delivering an amazing flying experience and strong visual impact. The Beta95X V3 Pusher Frame, made of high - quality PA12, dampens noise and vibrations, is abrasion - resistant, and has an EVA foam cushion for safety. The pusher style provides excellent flight operability. Package includes 1 * Beta95X V3 Whoop Quadcopter, 1 * Gemfan D63 5 - blades Propellers(2CW+2CCW), 1 * 20mm FPV Camera Mount, 1 * Spare EVA Foam Tape, 1 * USB Adapter Board for FC, 1 * Adapter Cable for Customized Naked Camera. Batteries and SMO 4K Camera are not included, but you can get them here.




Using the Beta95X V3 Whoop Quadcopter is easy. First, if you're using the SMO 4K camera, install it on the built - in mount and connect the power cable. Then, choose your preferred receiver option and set it up. For the best performance, use the recommended BETAFPV 450mAh 4S battery. Charge it using the XT30 connector before each flight. When flying, remember that the drone is highly maneuverable, so start with simple movements and gradually try FPV freestyle tricks. Pay attention to the flight time, which is about 4.5 minutes with the 450mAh 4S battery. After each flight, let the drone cool down. Check the propellers for any signs of damage. If they're worn out, replace them with the spare Gemfan D63 5 - blade propellers in the package. Keep the frame clean and dry. The PA12 material is durable, but it's still good to wipe it down after use. The EVA foam cushion can be replaced if it gets damaged. Store the drone in a cool, dry place when not in use. If you're using the DJI FPV goggles, make sure they're properly paired with the Beta95X V3 HD Digital VTX before each flight. And don't forget, the SMO 4K camera can give you amazing footage, so adjust the camera angle according to your needs, with the FPV camera degree ranging from 25° - 45° and the HD camera mount degree from 5° - 45°.