Foxeer Mini F722 V4 Mini Pro FPV ICM42688-P Flight Controller w/ Built-in Pit Pass 20x20mm

Are you in Australia and looking to buy a top - notch Foxeer F722 Mini V4 Pro FPV Flight Controller? This flight controller comes with a built - in Pit PASS and features a 20x20mm mounting hole. It has a STM32F722RET6 CPU, can run on a 2 - 6S Lipo power supply (6.5V - 30V), and offers a DC5V/3A BEC output. With BF OSD, 16M Flash Memory for the black box, 4 sets of UART, and RX4 ESC telemetry, it's a powerful device. It also includes a buzzer, smart audio, and a set of 2812 LED. Connect via Micro USB and use the FOXEERF722V4 firmware. Measuring 28.5x28.5mm and weighing only 4.4g, it can work in temperatures from - 20℃ to +55℃ and humidity from 20% to 95%. The package includes 1 FC and 4 rubber columns.

Using this Foxeer Mini F722 V4 Pro FPV Flight Controller is easy. First, connect it to your power supply within the 2 - 6S Lipo range (6.5V - 30V). Then, use the Micro USB to connect it to your computer and load the FOXEERF722V4 firmware. You can use the buzzer and smart audio features as needed. When it comes to mounting, use the 20x20mm mounting holes. Keep in mind that the working temperature should be between - 20℃ and +55℃, and the humidity between 20% and 95%. For storage, make sure the temperature is between - 20℃ and +70℃. To maintain it, keep it clean and dry. If you need to move it, handle it gently due to its light weight of 4.4g. And that's all you need to know to get the most out of your flight controller.