GEPRC CineLog 35 V2 3.5 HD Cinewhoop 6s Drone Walksnail Avatar

Are you in Australia looking to purchase a top - notch FPV drone? The GEPRC CineLog 35 V2 3.5 - inch 6S HD Cinewhoop Drone with Walksnail Avatar is your ideal choice. It comes with a Walksnail Avatar VTX, a strengthened main carbon plate, and an injection protection frame with an enhanced 7075 aluminum column for better structure. The battery is secured using a tie with 7075 aluminum parts, and the XT60E1 - M power plug integrated with the carbon plate makes it super convenient. The protective frame has a memory card and USB port for easy data access. Fitted with the F722 - 45A AIO and the new SPEEDX2 2105.5 motor, this drone offers more power, an aggressive system, and faster response. It combines cinematic, freestyle, leisure, and safety features, perfect for both indoor and outdoor flying and filming. **Features** - The Walksnail Avatar camera has an independent under - hanging shock - absorbing gimbal. - Strengthened carbon plate with hollow and noise - reduction design, along with an injection protection frame. - Propeller Guard has memory card and USB ports for easy data retrieval. - High - performance GEP F722 - 45A AIO V2 flight controller. - SPEEDX2 2105.5 motors paired with HQ DT90 propellers. - A carefully tuned 3.5 - inch HD cinematic FPV drone. - Solid and stable 7075 aluminum parts. - XT60E1 - M Power Cable. **Specifications** - Receiver options: PNP, GEPRC ELRS 2.4G, TBS Nano RX - Motor: SPEEDX2 2105.5 - 2150KV (6S) - OSD: Betaflight OSD with AT7456E chip - FC system: GEP - F722 - 45A AIO V2 - Weight: 285.8g - Model: Cinelog35 V2 HD Avatar - Camera: Avatar HD Camera V2 - Propeller: HQProp D - T90MM - MCU: STM32F722RET6 - Flight time: 5 minutes to 8 minutes 30 seconds - VTX: Walksnail Avatar - Bottom plate: 1.5mm - Gimbal plate: 2.0mm - Antenna: 5.8G & 2.4G - Frame: GEP - CL35 V2 - Wheelbase: 142mm - Gyro: ICM 42688 - P - Top plate: 3.5mm - ESC: 8Bit 45A - GPS: None **Recommended (Not Included)** - XT - 60 Batteries: 1050mah - 1300mah **Includes** - 1x GEPRC CineLog 35 V2 3.5 - inch HD Cinewhoop Drone with Walksnail Avatar - 6S (Choose Receiver) - 1x L - shaped screwdriver (1.5mm) - 1x Naked GoPro Mounting Base - 1x L - shaped screwdriver (2mm) - 1x L - shaped screwdriver (3mm) - 2x HQProp D - T90MM (2 pairs) - 2x M20*250mm battery strap - 1x Antenna fixed tube (pair) - 1x Antenna Mounting Base - 1x GoPro Mounting Base - 2x Battery Silicone Pads - 1x Plastic Tweezers - 1x Hardware Set - 1x M5 wrench - 1x Keychain

Using your GEPRC CineLog 35 V2 3.5 - inch 6S HD Cinewhoop Drone with Walksnail Avatar is a breeze. First, make sure you've chosen the right receiver for your needs. Then, attach the batteries. It's recommended to use XT - 60 batteries between 1050mah and 1300mah, but they're not included in the package. Once the batteries are in place, you're ready to take off! Before you start flying, check the propellers to ensure they're properly attached and in good condition. You can use the included tools to make any necessary adjustments. When flying, keep in mind the flight time, which is between 5 minutes and 8 minutes 30 seconds. Don't push the drone beyond its limits to avoid a crash. Also, be aware of your surroundings, especially when flying indoors. Avoid flying near people, animals, or fragile objects. For maintenance, after each flight, check the drone for any signs of damage. Look at the carbon plates, the protective frame, and the motors. If you notice any issues, use the included hardware set to make repairs. Clean the drone regularly to keep it in top shape. Wipe down the camera lens to ensure clear footage. Store the drone in a cool, dry place when not in use. With proper care, your drone will provide you with many hours of great flying and filming experiences.