HappyModel 1S 3.7V Battery Series LiPos Balance Charging Board

Are you in Australia and searching for a great way to charge your batteries? Look no further than the HappyModel 1S 3.7V Battery Series LiPos Balance Charging Board. This amazing board lets you charge or discharge up to 4 1S batteries at once using your personal charger. The charger will recognize the cells as being in series, just like a 4S battery with single - cell capacity. It features an XT60 + 4S balancing plug connection to the charger, a max amperage of 1.5A, and can support up to 4 1S lipos simultaneously. Weighing only 35g and with dimensions of 81 * 46 * 20mm, it's quite compact. You can select the number of elements to detect using the included jumper. The connectors include 1x XT60H - F, 1x JST - XH 4S1P, and 4x PH2.0. Remember, always charge identical Lipos with equivalent discharge. When charging multiple batteries, insert the jumper cap according to the number of batteries you're charging.

Using this HappyModel charging board is easy. First, connect it to your charger with the XT60 + 4S balancing plug. Then, attach up to 4 1S batteries to the appropriate connectors. Make sure to always charge Lipos that are identical and have an equivalent discharge. If you're charging multiple batteries, insert the jumper cap to match the number of batteries you're using. For example, if you're charging 4 batteries, put the jumper cap in the '4' position. When it comes to maintenance, keep the board clean and dry. Check the connectors regularly to ensure they're in good condition. If you notice any issues, stop using the board and get it checked. With proper use and care, this charging board will serve you well for a long time.