IFlight Nazgul5 V3 BNF Freestyle with DJI O3 Air Unit - EOL

Are you in Australia and looking to buy an amazing freestyle drone? The IFlight Nazgul5 V3 HD is here! It's packed with power, featuring XING - E Pro 2207 6S motors, a BLITZ F722 FC, and a BLITZ E45S 45A 4 - in - 1 ESC. Now it comes with the fantastic DJI O3 Air Unit. Key features include XING - E 2207 motors and NAZGUL 5140 props, 5' version fitting 5.1' style propellers, compatibility with both 30.5x30.5 and 20x20 stacks, 5mm arm design for durability, a popular True - X configuration, an LED illuminated logo, the DJI O3 HD System, TPU crash - guards, and easy - swap arms. Specifications are great too, with an operating temperature range from - 10°C to 40°C, max wind speed resistance of 130 Km/H, and more. It includes a pre - built, tuned, and tested iFlight Nazgul5 V3 HD 5' FPV Freestyle BNF with DJI O3 Air Unit - 6S, 2 sets of Nazgul 5 - inch propellers, 2 battery pads, and 2 antennas.

Using the IFlight Nazgul5 V3 is easy. First, make sure your battery is fully charged. Then, connect the receiver to your controller. Once everything is set up, power on the drone and your controller. Takeoff in an open area away from people and obstacles. When flying, keep an eye on the battery level as the max hover time is about 8 minutes. Also, note the operating temperature range is from - 10°C to 40°C, so don't fly in extreme cold or heat. For maintenance, after each flight, check the propellers for any damage and replace them if necessary. Clean the drone to remove any dirt or debris. Store it in a dry and cool place. If you have any issues, refer to the user manual or contact customer support.