Sonicmodell AR Wing Pro 1000mm Wingspan

Are you in Australia looking to buy the Sonicmodell AR Wing Pro? This is a much - needed upgrade of the classic ar wing. It easily integrates new and old technology. It has mounts for the new DJI HD FPV systems and original HD cameras from Gopro to Runcam. ### Features - It's the world's first FPV wing with a dedicated nose camera bay and main hatch bay for the DJI HD Air Unit System. - Aerodynamic FPV pockets on both sides of the fuselage have a high - efficiency NACA air - cooling system. This ensures your FPV gear performs well in all conditions. - Molded from tough EPP material with a built - in CF spar, it offers super - stable flight and great crash resistance. - Extra nose and side camera bays and a main hatch are compatible with all market FPV and AIO cameras. - The nose camera slot fits all HD action cameras like DJI, GoPro, and Runcam. - Multiple routing inside equipment bays makes wire layout easy. - The detachable main wing and wing tip allow glue - free assembly, making it very portable for its size. - A built - in CF rod in ailerons gives precise and sharp control. - An accurate ball link control system provides agile and quick response. - A special “servo arm built - in” structure protects the servo arm and keeps a low profile. - A large battery bay allows for extended flight time and room for any flight controller. - A decent rear bay for ESC or other gear isolates interference from other FPV equipment. - A built - in plate inside the fuselage adds extra strength. - Extra CA Hinges for DIY give stiffer and more agile control to elevons. - The optimized main air - cooling design prevents gear overheating. ### AR Wing Pro Specifications - Motor: 2216 - 1400KV - ESC: 40A w/5V 3A BEC - Servos: 2pcs 9g metal gear servo - Propeller: 2 blades 8x5 - Recommended Batteries: Lipo 4S 3200 - 3500mAh, ZOHD Lionpack 18650 4S2P 7000mAh - Brand Name: SONICMODELL - Item Name: AR Wing Pro - Material: High - Quality EPP - Wingspan: 1000mm (39.37'') - Length: 450mm (17.71'') - Version: KIT, PNP - KIT Empty Weight: 340g - PNP Empty Weight: 500g (with basic power combo) ### Kit Includes - SONICMODELL AR Wing Pro KIT - 1 hardware pack - 2 Wings - 1 Camera nose piece - 2 Back fins - 1 Body Cap - 1 Full Body Carbon Fibre Rod - KIT package size: 40*31*17mm ### PNP Includes - 1 Propeller - 1 hardware pack - 2 Wings - 1 Camera nose piece - 2 Back fins - 1 Body Cap - 1 Full Body Carbon Fibre Rod - PNP package size: 40*31*17mm ### BROWSE MORE Browse all Wing Kits. Browse all Wing Batteries. Browse all ZOHD.

Using the Sonicmodell AR Wing Pro is easy. First, assemble the parts. The detachable main wing and wing tip make it a glue - free assembly. Just connect the components following the included hardware pack. For the battery, choose a recommended one like the Lipo 4S 3200 - 3500mAh or the ZOHD Lionpack 18650 4S2P 7000mAh and place it in the large battery bay. Install your camera in the nose or side camera bays, as they are compatible with many market cameras. When flying, the accurate ball link control system will give you an agile and quick response. The built - in CF rod in ailerons provides precise control. Remember, the aerodynamic design and air - cooling system keep your gear performing well, but don't fly in extremely harsh conditions. For maintenance, check the parts regularly. Look for any signs of wear and tear, especially on the servo arm protected by the special “servo arm built - in” structure. If you DIY with the extra CA Hinges, make sure they are properly installed. Clean the fuselage and equipment bays gently to keep the multiple routing inside clear for easy wire layout. Store it in a dry place when not in use to prevent damage to the high - quality EPP material.