Bambu Lab's Translucent PETG filament is a cut above the rest with its outstanding printing features. It overcomes common PETG problems like nozzle sticking, leakage, and clumping during printing, giving you a smooth experience. This filament is water - resistant, UV - resistant, and can handle temperature changes, making it perfect for outdoor use. It comes in 8 bright colors. You can blend different colors and play with layer and wall thicknesses to take your prints to the next level. The Bambu Translucent PETG series is durable and weather - resistant, with great impact resistance. Its optimized formula ensures a seamless 3D printing process, reducing issues like stringing and clumping. It has excellent anti - warping performance, works with both closed and open printers, and offers reliable dimensional stability. Before use, dry the filament at 65 °C for 8 hours and protect it from moisture during printing to avoid low - quality prints with bubbles. The transparency of prints can vary based on size, thickness, structure, and printing parameters. All printing parameters are embedded in RFID, which our AMS can read, so you can load and print without tedious settings. Recommended printing settings include a drying temperature of 65 °C for 8 hours, keeping container humidity below 20% RH, a nozzle temperature of 230 - 270 °C, a bed temperature of 65 - 75 °C with glue, and a printing speed below 220 mm/s. It has specific physical and mechanical properties and comes with a filament spool with desiccant and a filament label.
Using the Bambu Lab Translucent PETG filament is easy. First, make sure to dry the filament at 65 °C for 8 hours in a blast drying oven. During the printing process, keep the container's humidity below 20% RH by sealing it with a desiccant. Set your nozzle temperature between 230 - 270 °C and the bed temperature at 65 - 75 °C with glue. Print at a speed below 220 mm/s. When choosing colors, you can blend different ones to create unique effects. Also, experiment with layer and wall thicknesses to see what looks best. Remember, the transparency of your prints can change depending on size, thickness, structure, and printing parameters. Always protect the filament from moisture, or you might end up with low - quality prints full of bubbles. After use, store the filament in a dry place to keep it in good condition. And don't worry about setting up the printing parameters, as they're all in the RFID that the AMS can read.
