Panchroma™ Glow PLA filament has a natural color during the day and shows a beautiful glowing effect in the dark! Printing settings are as follows: printing temperature ranges from 190˚C to 230˚C, bed temperature from 25˚C to 60˚C, and printing speed from 40mm/s to 60mm/s. Keep the fan on. It requires a hardened nozzle and prints well on any stock 3D printer with one. Panchroma Glow Green PLA was formerly Polymaker Polylite Glow PLA. Click here to learn more about Polymaker's change from PolyLite to Panchroma. Also, you can browse various filaments like Carbon Fibre, ASA, ABS, Nylon, PC, PETG, PLA (including PLA+), PVA, Silk, SLA Resin, Speciality, and TPU filaments.
Using this Polymaker Panchroma Glow PLA filament is easy. First, make sure your 3D printer has a hardened nozzle. Set the printing temperature between 190˚C and 230˚C, the bed temperature from 25˚C to 60˚C, and the printing speed at 40mm/s to 60mm/s. Keep the fan on during printing. Notice that it won't work well without a hardened nozzle. After printing, store the filament in a dry place to keep it in good condition. Enjoy the amazing glowing effect of your prints in the dark!
