Product Information
Are you in Australia and looking to buy a Prusa MK3S PEI/textured coated spring steel build plate? Look no further! This Energetic bed is double - sided, with no magnet. The textured side is black in the PEI PRO HF version and features the PHASER FPV logo in red at the bottom. Note that these beds are made by a third - party, not Prusa. Upgrade your 3D printing with this PEI - coated build sheet. No more worries about glue sticks, painters tape, or prints not sticking. Just clean the bed with isopropyl alcohol, start printing, and when done, flex the sheet and the print pops off easily. Advantages include no warping or rusting, easy first - layer printing for new users, great flexibility, good magnet adhesion, compatibility with various filaments (especially PLA), easy cleaning, fast heater performance, and it's a lifetime 3D printer bed. Features: Smooth PEI, 0.2MM thick with 3M468 tape. The material is 100% real Ultem1000 (PEI) in amber color with a matte surface, made in Europe. The spring steel sheet is flat, flexible, and adheres well to the bed magnet. The PEI has pre - applied 3M tape, bubble - free. Recommended print temps: PLA – 60C, HTPLA – 60C, PETG – 70 - 80C, PCTG – 70 - 80C, ABS – 100C.
Using this spring steel build plate is a breeze. First, clean the bed with isopropyl alcohol before starting your print. Set the recommended print temperature according to the filament you're using, like 60C for PLA. When printing PETG, PCTG, or TPU, apply hairspray or PVA gluestick to avoid bonding the filament to the PEI surface and damaging it. After the print is finished, wait until the plate is close to room temperature (under 30C) before removing the print. You can easily remove the print by taking out the spring steel plate, flexing it a bit, and popping the print off. To keep it in good condition, clean it regularly with isopropyl alcohol. It's a durable product, but handle it gently to prevent any unnecessary damage.
