Are you in Australia looking for a high - quality build sheet for your RatRig 3D printer? Our Energetic 508x508mm double - sided spring steel sheet is the perfect choice! One side is a smooth PEI layer, and the other is textured with a gold finish. Both sides feature the PHASER FPV logo at the bottom. With a PEI - coated build sheet, you can take your 3D printing to new heights. No more worrying about glue sticks or prints not sticking. Just clean the bed with isopropyl alcohol, start printing, and once the print is done, flex the sheet, and the print will easily come off. This sheet has many advantages. It won't warp or rust. Even new users can achieve a great first layer. It's flexible, removable, and sticks well to magnets. It suits various filaments, especially PLA. Cleaning is a breeze - just flex the plate a bit after the print cools. It also heats up fast, reducing waiting time. It's a lifetime 3D printer bed! The spring steel sheet is flat with a strong magnetic base (1.5MM, 300LSE tape, magnetism - 600GS, and can resist high temperatures up to 130C for a long time). The PEI is a 100% real Ultem1000, amber - colored with a matte surface, made in Europe. It comes pre - applied with 3m tape, bubble - free. Recommended print temps are: PLA – 60C, HTPLA – 60C, PETG – 70 - 80C, PCTG – 70 - 80C, ABS – 100C.
Using this spring steel sheet is easy. First, clean the bed with isopropyl alcohol before starting a print. Set the print temperature according to the filament you're using: 60C for PLA and HTPLA, 70 - 80C for PETG and PCTG, and 100C for ABS. If you're printing PETG, PCTG, or TPU, it's a good idea to apply hairspray or a PVA glue stick to prevent the material from bonding too strongly to the PEI surface and damaging it. When the print is finished, wait until the plate is close to room temperature (under 30C) before removing the part. To remove the print, simply take out the spring steel plate, flex it a little, and the print will pop off. For maintenance, keep the sheet clean. If it gets dirty, clean it with isopropyl alcohol. Store it in a dry place to prevent rusting. With proper use and care, this sheet will serve you well for a long time.
