AC to DC 19v 3.4A 65W Refurbished Power Supply for Lipo Chargers with XT60 Cable Adapter

Are you looking for a DC power supply for your FPV Lipo Charger with an XT60 input? Look no further! Many chargers like the ISDT Q6 Nano, ToolkitRC M6 & M7 need an XT60 power input. So, we've created a complete package with the required adapter cable and a 19V DC refurbished power supply. These chargers are tested, C - Tick/RCM compliant, and offer great value for charging your lipos. Calculate your charging amperage by dividing the total wattage by your cell voltage. For example, a 4s battery (13.5v flat - 16.8v charged) can be charged at a max rate of 3.8 amps. A 6s battery (20v flat - 25.2v charged) has a max charging rate of 2.5 amps. Overdrawing the wattage may reboot or turn off the charger, and you can check the wattage draw on the charger status screen. Note that power supplies may vary slightly in brand and size due to supply issues. This power supply can also power a TS100, TS101, or Pinecil Soldering Iron with an XT60 to DC5525 cable. Specifications include an AU standard AC 100 - 240V~1.5A input voltage, 50Hz - 60Hz input frequency, 19V - 3.42A - 65W output voltage, and certifications like C - Tick and CE. It comes with an Australian style 3 - pin power cable and a DC 5.5x2.1mm jack. The package includes a DC to XT60 adapter cable, 1x power cable, and 1x 19V 65w DC power supply. Browse all LiPo Chargers, LiION Chargers, LiPo Batteries, and cables and connectors.

Using this power supply is easy. First, connect the Australian style 3 - pin power cable to the power supply and plug it into a power outlet. Then, use the DC to XT60 adapter cable to connect the power supply to your FPV Lipo Charger or other compatible devices. When charging your batteries, calculate the appropriate charging amperage based on the battery's cell voltage as shown in the product description. Make sure not to overdraw the wattage. If the charger reboots or turns off, it may be due to over - drawing, and you'll need to power cycle it. Check the wattage draw on the charger status screen. Regarding maintenance, keep the power supply in a dry and cool place. Wipe it with a dry cloth if it gets dirty. Remember that the brand and size of the power supply may vary slightly due to supply issues, but it won't affect its performance. Also, if you want to power a TS100, TS101, or Pinecil Soldering Iron, you'll need an XT60 to DC5525 cable.