Are you in Australia and on the hunt for high - quality EZPC Polycarbonate Filament? Look no further! ezPC™ is a top - notch Polycarbonate designed for seamless printing on a wide range of 3D printers. Printing with ezPC™ is a breeze, offering low warp, amazing mechanical strength, great heat resistance, and superb impact resistance. It's the perfect blend of easy printing and excellent performance. This polymer is tailor - made for 3D printing functional prototypes and end - use parts. It combines ease of printing with outstanding mechanical and thermal properties. ezPC™ is a game - changer, ideal for parts that would fail with standard materials like PLA, PETG, or ABS. It bridges the gap between lower - performance and high - end materials. The benefits of ezPC™ are numerous: low warp, high heat resistance, and excellent mechanicals; it's easy to use on many printers without a heated chamber; it has high thermal properties (Tg of 118°C and HDT of 112°C), better than PLA, PETG, ABS, and ASA; it has no odors or hazardous fumes, making it perfect for home or office; it's great for both functional end - use parts and prototypes; and it adheres well to our AquaTek™ X1 USM Water Soluble Support. For technical and safety data, click the links provided. The filament is 1.75mm +/- 0.05mm in diameter. Recommended print settings include an extruder temperature of 255 - 275°C, a bed temperature of 90 - 110°C, no fan, using Magigoo Bed Prep Adhesive or Nano Polymer Adhesive for the bed, no heated chamber required, a print speed of 40 - 60mm/s, and using water - soluble AquaTek™ X1 USM for complex parts. Remember, dry it at 80°C for at least 4 hours after opening as it absorbs moisture. Browse more 3DXTech, Polycarbonate, and Specialty Filaments.
Using this 3DXTech EZPC Polycarbonate Filament is quite straightforward. First, set your extruder temperature between 255 - 275°C and the bed temperature at 90 - 110°C. Don't use the fan while printing. Prepare your bed with Magigoo Bed Prep Adhesive or Nano Polymer Adhesive for the best results. You don't need a heated chamber. Print at a speed of 40 - 60mm/s. For complex parts, use the water - soluble AquaTek™ X1 USM as support. One important thing to note is that this filament absorbs moisture after opening. So, if you notice any printing issues, dry it at 80°C for at least 4 hours. As for maintenance, keep it in a dry place when not in use to prevent it from absorbing too much moisture. This will ensure you get the best printing results every time.
