Product Information
Are you in Australia and looking to buy 3DXTech TPU+GF30 FIBERX 60D 1.75mm filament? FibreX™ TPU+GF30 elastomer is an engineering - grade material. It offers a great balance of printability, flexibility, chemical resistance, and toughness. With a hardness of 60D, 3DXFLEX™ TPU+GF30 allows you to create very tough, impact - resistant, and flexible prints. While we recommend direct - drive extruders, experienced users can also succeed with Bowden - type drives. Key benefits of FibreX™ TPU+GF30 (60D) include Shore 60D semi - flex hardness, easy printing compared to similar flexible materials, excellent layer bonding, outstanding fatigue resistance, very low odor during printing, low moisture absorption, retained flexibility at low temperatures, and being styrene and BPA free. The filament comes in 1.75mm and 2.85mm diameters with a tolerance of +/- 0.05mm. Recommended print settings are an extruder temperature of 230 - 255°C, a bed temperature of 23 - 40°C, no need for a heated chamber, and drying at 65°C for 4 hours.
Using this 3DXTech TPU+GF30 FIBERX 60D filament is a breeze. First, if your filament has been exposed to air for a while, dry it at 65°C for 4 hours. When it comes to printing, set your extruder temperature between 230 - 255°C and the bed temperature between 23 - 40°C. You don't need a heated chamber. We suggest using a direct - drive extruder, but if you're an experienced user, a Bowden - type drive can work too. As for maintenance, keep the filament in a dry place to prevent moisture absorption. And since it has low odor during printing, you won't have to worry about unpleasant smells in your workspace. Enjoy creating tough, flexible, and impact - resistant prints with this amazing filament!
