Inslogic Matte PLA (Polylactic Acid) filament is a great choice for FDM 3D printers using 1.75 mm diameter filament, with a precision of ±0.02 mm. It's made from biodegradable material, so it's eco - friendly. You don't need a heated print bed to use it. Printing with this matte PLA is a breeze. It can be printed at lower melting temperatures while still showing bright colors. There's less warping during printing and better flow, so you can get smooth, matte - finished prints with fine details every time. This upgraded matte PLA is tougher and more durable. It's perfect for all kinds of things, from complex models to end - user products and prototypes. It's also compatible with Bambu Lab AMS and A1 mini. The matte PLA filament is easy to use, with better layer adhesion and minimal warping for consistent results. Its fine details, textured matte finish, durability, and consistent vibrant colors make 3D printing even better. Features include less warping, easy printing, being biodegradable and nature - friendly, better layer adhesion, no need for a heated bed, less nozzle clogging, and being odourless. Specifications: length 290 m, net weight 1 kg, reusable spool & cardboard coil weight 232 ± 3 g, total weight 1.233 ± 0.03 kg, diameter 1.75 mm ± 0.02 mm, tensile strength 50.5 MPa, elongation at break 9.6%, flexural strength 61 Mpa, flexural modulus 2234 Mpa, density 1.3 g/cm³, glass transition temperature (10 °C/min) 58.8 ℃, heat deflection temperature at 0.45 MPa 53 ℃. Note that all specs are lab - tested and material properties may vary. Printing settings: dry at 50 °C for 4h, use nozzle sizes 0.2, 0.4, 0.6 mm, nozzle temperature & printing speed: 205 - 215°C at 50 - 100 mm/s and 215 - 245°C at 100 - 230 mm/s, bed temperature 50 - 60 °C, cooling fan speed 100%, use textured PEI sheet or cool plate as the bed type. These settings are just a guide and may need adjustment for the best results.
Using this Inslogic Matte PLA filament is simple. First, make sure to dry the filament at 50 °C for 4 hours. Then, choose a suitable nozzle size from 0.2, 0.4, or 0.6 mm. You can set the nozzle temperature and printing speed according to the ranges provided. Keep the bed temperature between 50 - 60 °C and run the cooling fan at 100%. Use a textured PEI sheet or a cool plate as the bed. Remember that the material properties might change depending on how you print. So, you may need to fine - tune the settings for your specific 3D printer. When it comes to maintenance, store the filament in a dry place to prevent it from absorbing moisture. Also, clean the nozzle regularly to avoid clogging. And since it's biodegradable, you can feel good about using it in an eco - friendly way.
