Are you searching for Bambu Lab PLA Marble Filament in Australia? Bambu PLA Marble imitates the look of natural stone. With inorganic particles, it features a vivid stone - like texture similar to marble, granite, or bricks, bringing a natural touch to your 3D prints and giving your projects an amazing finish. It comes with RFID for intelligent printing. All printing parameters are embedded in RFID, which can be read via our AMS (Automatic Material System). Just load and print, no more annoying setting steps. Recommended printing settings include drying at 55 °C for 8 hours before printing, keeping the container's humidity below 20% RH (sealed, with desiccant), setting the nozzle temperature between 190 - 230 °C, the bed temperature (with PVP glue) between 35 - 45 °C, and the printing speed below 250 mm/s. The filament has specific physical properties such as a density of 1.22 g/cm³, a Vicar softening temperature of 57 °C, a heat deflection temperature of 56 °C, a melting temperature of 156 °C, and a melt index of 32.2 ± 4.5 g/10 min. Its mechanical properties include a tensile strength of 42 ± 3 MPa, a breaking elongation rate of 6.7 ± 0.5 %, a bending modulus of 2490 ± 150 MPa, a bending strength of 85 ± 5 MPa, and an impact strength of 24.0 ± 2.5 kJ/m². The package includes 1x filament & desiccant, instructions & spool sticker, and 1x filament label. You can also browse other filaments like Prusament, ASA, ABS, and more, or check out all our 3D printing supplies.
Using this Bambu Lab PLA Marble Filament is a breeze. First, make sure to dry the filament at 55 °C for 8 hours before you start printing. This helps to remove any moisture and ensures better print quality. Keep the container where you store the filament sealed with a desiccant to maintain humidity below 20% RH. When it's time to print, just load the filament and let the RFID do its job. The AMS will read the printing parameters, so you don't have to set them manually. Set the nozzle temperature between 190 - 230 °C and the bed temperature (with PVP glue) between 35 - 45 °C. Try to keep the printing speed below 250 mm/s for the best results. As for maintenance, always store the filament in a dry place. Check the desiccant regularly and replace it if it's saturated. If you notice any clogging in the nozzle, clean it according to your printer's instructions. Enjoy creating beautiful 3D prints with this amazing filament!
