Inslogic Multicolor Silk PLA Filament is a universal choice for FDM 3D printers using 1.75 mm diameter filament, with a precision of ±0.02 mm. It combines the simplicity of PLA with a gorgeous high - gloss finish, perfect for creating luxurious decorations and complex structures. This filament has a magical shine that gives your 3D prints a fashionable edge with a silky surface. The Inslogic Silk collection offers two amazing options: dual - color and tri - color. The Dual - Colour Silk filament smoothly blends two colors, evenly spread on both sides of the filament at all points. The Tri - Colour Silk filament fuses three distinct colors in one strand. This unique design makes printed objects change color depending on the light source or viewing angle, enhancing your creations. The Inslogic PLA Silk Filament adds a touch of luxury to your prints while keeping the user - friendly features of PLA, like great strength and toughness. Let your creativity run wild and make eye - catching artistic models. It's also compatible with Bambu Lab AMS and A1 mini. Why choose Inslogic Silk PLA Filament? It combines the ease of PLA with a special color - shifting effect, maintaining PLA's strength, high precision, and stability. It creates elegant, attention - grabbing prints. Features include easy printing, high precision, being environmentally friendly, retaining PLA's mechanical strength, reducing layer visibility on printed surfaces, having a unique dynamic color - shifting look, and creating beautiful objects with a smooth, silky finish. Specifications: Length is 310 m, net weight is 1 kg, reusable spool & cardboard coil weight is 232 ± 3 g, total weight is 1.233 ± 0.03 kg, diameter is 1.75 mm ± 0.02 mm, tensile strength is 60.6 MPa, elongation at break is 6.3%, flexural strength is 65 Mpa, flexural modulus is 1895 Mpa, glass transition temperature at 10 °C/min is 60.9 ℃, and heat deflection temperature at 0.45 MPa is 53 ℃. Note that all specifications are lab - tested and material properties may vary due to part geometry, print orientation, settings, and temperature. Printing settings: Dry at 55 °C for 4h. Use a nozzle size of 0.2, 0.4, or 0.6 mm. Nozzle temperature and printing speed can be 205 - 215 °C at 50 - 100 mm/s, or 215 - 235 °C at 100 - 200 mm/s. Bed temperature should be 50 - 60 °C, cooling fan speed at 100%, and use a smooth PEI sheet or high - temperature plate as the bed type. These settings are just a guide; each 3D printer may need some fine - tuning for the best results.
Using this Inslogic Multicolour Silk PLA Filament is a breeze. First, make sure to dry the filament at 55 °C for 4 hours before printing. This helps to get rid of any moisture and gives you better print quality. When it comes to the printer, it works well with FDM 3D printers that use 1.75 mm diameter filament. You can choose a nozzle size of 0.2, 0.4, or 0.6 mm. For the nozzle temperature and printing speed, you have options. You can set the nozzle at 205 - 215 °C and print at a speed of 50 - 100 mm/s, or go for 215 - 235 °C at 100 - 200 mm/s. Keep the bed temperature between 50 - 60 °C and the cooling fan at 100% speed. A smooth PEI sheet or a high - temperature plate is a good choice for the bed. Remember, the material properties can change depending on how you design your part, how you orient it for printing, your print settings, and the temperature. So, you might need to do a bit of fine - tuning to get the best results. After use, store the filament in a dry place to keep it in good condition. If you're not using it for a long time, it's a good idea to seal it in a bag with a desiccant to prevent moisture from getting to it. That way, your next print will be just as great as the first one.
